TXA5

Jan. 1, 2017 12:00am – The TXA5 module from Ka-Ro is based on a 1-core 32-bit Atmel SAMA5D42 backed by up to 0GB RAM.

(click image for a larger view)


Board description:
Overview... System-on-Chip...
  • Atmel SAMA5D42
  • Primary processor type -- ARM Cortex-A5
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 1
  • Primary processor clock rate (GHz) -- 0.53
Additional processors (if any)...
  • GPU (graphics) -- NEON supported
  • MCU (microcontroller) --
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 0
  • Type --
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 4.1
  • Type --
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface ype -- SD
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 1
  • USB host types -- 2
  • USB OTG ports -- 1
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 100
  • Wake-on-LAN support? --
Wireless...
  • WiFi --
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- No
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) --
Camera interfaces...
  • Number of camera ports -- 0
  • Camera interface types --
Audio I/O...
  • Analog output ports -- 1
  • Audio connector type -- Other format, via pin header, etc.
  • Audio via HDMI? -- No
  • SPDIF interfaces -- 0
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 103
  • ADC -- 0
  • PWM -- 1
  • SPI -- 0
  • I2C -- 0
  • UARTs -- 0
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- yes
  • Android --
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

4GB eMMC + 128MB NAND flash, 200-pin TX edge connector with 3.3V I/O power, LCD TFT (24bpp) with 4x overlays, 2-wire 400Kbps, I2C, 2x I2S synchronous serial audio, 3x UART, SPI, I2C, PWM, Parallel CMOS image sensor (ITU-R BT. 601/656), 2x SD 2.0 and eMMC 4.3, Up to 103 GPIOs, PMIC
Other: 10 year availability

Physical specs...
  • Width (mm) -- 68
  • Height (mm) -- 26
  • Depth (mm) -- 4
  • Weight (gm) --
  • Input voltage, min. (V) -- 5
  • Input voltage, max. (V) -- 5
  • Input current, min. (A) -- 0.4
  • Input current, max. (A) -- 1
  • Operating temp., min. (°C) --
  • Operating temp., max. (°C) --
  • Certifications -- (none listed)
Further information...
[board ID = 64]

Share your impressions of this board with the HackerBoards community...