UCM-iMX8M-Mini

The Compulab UCM-iMX8M-Mini is a 28 x 38mm SoM based on NXP’s dual- or quad-core, 1.8GHz i.MX8M SoC. It comes with up to 4GB RAM and 64GB eMMC, and integrates GbE, WiFi, and BT connectivity, multiple USB and UART ports plus GPIO lines, and MIPI-DSI and MIPI-CSI display and camera interfaces. Three temperature ranges are supported, up to -40 to 85° C, and there’s also an optional 118 x 118mm carrier board.

Mar. 3, 2019 4:59pm – The UCM-iMX8M-Mini module from Compulab is based on a 4-core 64-bit NXP i.MX8M Mini DualLite/Dual/Quad backed by up to 4GB RAM.

(click image for a larger view)


Board description:

    The Compulab UCM-iMX8M-Mini is a 28 x 38mm SoM based on NXP’s dual- or quad-core, 1.8GHz i.MX8M SoC. It comes with up to 4GB RAM and 64GB eMMC, and integrates GbE, WiFi, and BT connectivity, multiple USB and UART ports plus GPIO lines, and MIPI-DSI and MIPI-CSI display and camera interfaces. Three temperature ranges are supported, up to -40 to 85° C, and there’s also an optional 118 x 118mm carrier board.

Overview... System-on-Chip...
  • NXP i.MX8M Mini DualLite/Dual/Quad
  • Primary processor type -- ARM Cortex-A53
  • Primary processor word-width -- 64-bit
  • Primary processor cores -- 4
  • Primary processor clock rate (GHz) -- 1.8
Additional processors (if any)...
  • GPU (graphics) -- GC NanoUltra
  • MCU (microcontroller) -- ARM Cortex-M4
  • FPGA (gates) --
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 4
  • Type -- LPDDR4
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 16.0
  • Type -- eMMC
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface ype -- Other format, via pin header, etc.
  • m.2 interfaces -- 0
  • m.2 NVMe support --
SATA support...
  • SATA ports -- 0
USB ports...
  • USB hosts -- 2
  • USB host types --
  • USB OTG ports -- 0
Ethernet...
  • Ethernet interfaces -- 1
  • Maximum LAN speed (Mbps) -- 1000
  • Wake-on-LAN support? --
Wireless...
  • WiFi -- 802.11ac
  • Bluetooth -- 4.2 BLE
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 0
  • HDMI version --
  • Max. HDMI resolution --
  • FPS at max. resolution --
  • HDMI audio support? -- No
Other display interfaces...
  • Composite video (CVBS) ports -- 0
  • Other display interfaces (DSI, LVDS, VGA...) -- MIPI-CSI (4 data lanes), up to 1080p
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- MIPI-CSI (4 data lanes)
Audio I/O...
  • Analog output ports -- 0
  • Audio connector type -- n/a
  • Audio via HDMI? -- No
  • SPDIF interfaces -- 1
  • Line inputs -- 0
  • Mic inputs -- 0
  • On-board microphones -- 0
Other I/O...
  • GPIO -- 85
  • ADC -- 0
  • PWM -- 4
  • SPI -- 3
  • I2C -- 3
  • UARTs -- 4
  • RS232 (or 485 or 422) -- 0
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- No
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- Linux 2.5, Yocto filesystem, U-Boot
  • Android -- yes
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

* Available in models with up 1GB to 4GB RAM and 4GB – 16GB eMMC flash
* 1x MMC/SD/SDIO interface (on baseboard interface)
* PCIe x1 Gen. 2.1 interface
* 2x 100-pin connector baseboard interface
* Capacitive touch-screen support via SPI and I2C
* Available in three temperature ranges, as wide as -40 to 85° C
* Shock — 50G / 20 ms
* Vibration — 20G / 0 – 600 Hz
* Optional 118 x 118 x 22mm SB-UCMIMX8 carrier board and integrated SBC (SoM + carrier board)

Physical specs...
  • Width (mm) -- 28
  • Height (mm) -- 38
  • Depth (mm) -- 4
  • Weight (gm) -- 7
  • Input voltage, min. (V) -- 3.5
  • Input voltage, max. (V) -- 4.4
  • Input current, min. (A) -- 0
  • Input current, max. (A) -- 0
  • Operating temp., min. (°C) -- -40
  • Operating temp., max. (°C) -- 85
  • Certifications -- (none listed)
Further information...
[board ID = 329]

Share your impressions of this board with the HackerBoards community...