ZynqBerryZero

The ZynqBerryZero is a tiny SoC module based on the Xilinx Zynq-7010 FPGA, in a Raspberry Pi Zero form-factor. Features include 512MB RAM, 16MB Flash, 2x microUSB, miniHDMI, MIPI-CSI-2, and 40-pin expansion with 26x GPIO.


(click image to enlarge)

Product overview...
  • Board Name -- ZynqBerryZero
  • Category -- module
  • Model -- TE0727
  • Manufacturer -- Trenz Electronic
  • Official website -- click here
  • Price -- $130 (USD)
  • Additional info may be found via this automated Google search
  • Posted 2020-08-26 12:00am
System-on-Chip...
  • Xilinx Zynq-7010
  • Primary processor type -- ARM Cortex-A9
  • Primary processor word-width -- 32-bit
  • Primary processor cores -- 2
  • Primary processor clock rate (GHz) -- 0.67
Additional processors (if any)...
  • GPU (graphics) --
  • MCU (microcontroller) --
  • FPGA (gates) -- Artix-7 FPGA equivalent, with 28K logic cells
  • Other (DSP, FPU, NPU, TPU, AI...) --
System RAM...
  • Maximum capacity (GB) -- 0.512
  • Type -- DDR3L
  • ECC support -- No
  • Factory installed? -- Yes
On-board solid-state storage...
  • Maximum capacity (GB) -- 0.016
  • Type --
  • Factory installed? -- Yes
Removable solid-state storage...
  • Interface type -- microSD
  • m.2 interfaces --
  • m.2 NVMe support --
SATA support...
  • SATA ports --
USB ports...
  • USB host ports -- 2
  • USB OTG ports --
  • USB port types -- 2
Ethernet...
  • Ethernet interfaces --
  • Maximum LAN speed (Mbps) --
  • Wake-on-LAN support? --
Wireless...
  • WiFi --
  • Bluetooth --
  • Broadband --
  • LoRa --
HDMI...
  • Number of HDMI ports -- 1
  • HDMI version -- mini-HDMI
  • Max. HDMI resolution --
  • FPS at max. resolution --
Other display interfaces...
  • Composite video (CVBS) ports --
  • Other display interfaces (DSI, LVDS, VGA...) --
Camera interfaces...
  • Number of camera ports -- 1
  • Camera interface types -- MIPI-CSI-2
Audio I/O...
  • Analog output ports --
  • Audio connector type --
  • Audio via HDMI? -- 0
  • I2S interfaces --
  • SPDIF interfaces --
  • Line inputs --
  • Mic inputs --
  • On-board microphones --
Other I/O...
  • GPIO -- 26
  • ADC --
  • PWM --
  • SPI --
  • I2C --
  • UARTs --
  • RS232 (or 485 or 422) --
  • IR receiver -- No
Expansion connector compatibility?
  • Arduino compatible -- No
  • Raspberry Pi compatible -- Yes
Miscellaneous functions...
  • Real time clock (RTC) support --
  • PMIC/PMU (power management controllers) --
  • Lithium battery support --
Operating system support...
  • Linux -- PetaLinux with U-boot (presumed)
  • Android --
  • Windows --
  • Other OSes --
Other features not listed elsewhere:

* Xilinx Zynq XC7Z010-1CLG225C FPGA SoC with 28K logic cells
* Raspberry Pi Zero form-factor
* 512MB DDR3L SDRAM
* 16MB flash
* 40-pin HAT header
* Total I/O: 26x GPIO
* 1x microUSB for JTAG/UART
* 1x microUSB 2.0
* 1x microSD card slot
* mini-HDMI connector (type C)
* CSI-2 connector (camera)
* NOTE: additional details are not currently available

Physical specs...
  • Width (mm) -- 65
  • Height (mm) -- 30
  • Depth (mm) --
  • Weight (gm) --
  • Input voltage, min. (V) --
  • Input voltage, max. (V) --
  • Input current, min. (A) --
  • Input current, max. (A) --
  • Operating temp., min. (°C) --
  • Operating temp., max. (°C) --
  • Certifications --

Print Friendly, PDF & Email

[board ID = 462]

Share your impressions of this board with the HackerBoards community...