BIGTREETECH Pi 2
BIGTREETECHAn SBC from a 3D printer manufacturer BIGTREETECH that can run Linux and has good support for Klipper 3D printer free firmware.
📅 Added on June 23, 2024
🔗 Official website
🛠️ Edit source (see our guide)
Hardware Specifications (Start Comparison)
| Manufacturer | BIGTREETECH |
|---|---|
| SoC | Rockchip RK3566 |
| CPU | 4× ARM Cortex-A55 @ 1.8Ghz |
| GPU | 1× Mali-G52 |
| NPU | 1× Generic NPU |
| RAM | 8.0 GiB DDR4 |
| eMMC | 1× removable 32.0 GiB bootable |
| SD | 1× microSD slot bootable |
| USB |
4× host ports
1x USB Type-C.
1x USB-OTG
|
| Ethernet | 1× 1 Gbps |
| Wi-Fi |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n/ax 5Ghz a/n/ac |
| Bluetooth |
On-board Bluetooth (5.2)
|
| Video interfaces |
1×
HDMI 2.0
(HDMI-D micro)
|
| Display I/O |
1× MIPI-DSI (Display Serial Interface)
|
| Audio |
1× audio output
1× S/PDIF output
1× line-in
1× microphone-in
|
| Camera I/O | 1× camera interfaces |
| GPIOs | 28× GPIOs |
| Pin Header |
Raspberry Pi HAT
|
| Embedded I/O | - |
| Generic Peripherals |
IR receiver
|
Physical Aspects
| Power Requirements |
5.0
V DC
2.0A
|
|---|---|
| Battery | - |
| Dimensions | 94mm x 20mm x 56mm |
| Form Factor | Raspberry Pi |
| Mounting holes | Yes |
Software
| Linux |
Yes
|
|---|---|
| Android | - |
| Windows | - |
Certifications and conformity
(No information available)
Links
Add any links to relevant datasheets and schematics here.No links were added yet.
Availability
The reference price is (US) $50.0For purchase information, please refer to the official website .
