NanoPi A64
FriendlyElecOfficial description:
The NanoPi A64 is a new board of high performance with low cost designed by FriendlyElec. It uses Allwinner’s 64-bit A64 quad-core SoC(ARM Cortex-A53). FriendlyElec has made a UbuntuCore and a UbuntuMATE image files for it.
The NanoPi A64 is a small board with comprehensive interfaces, ports and features. It has Ethernet, IR receiver, Video/Audio input and output. It has onboard AXP803 PMU and WiFi. It takes power input from its MicroUSB port. It has MIPI-DSI and DVP interfaces, GPIO pin-header compatible with Raspberry Pi and a serial debug port.
📅 Added on January 01, 2017
🔗 Official website
🛠️ Edit source (see our guide)
Hardware Specifications (Start Comparison)
| Manufacturer | FriendlyElec |
|---|---|
| SoC | AllWinner A64 |
| CPU | 4× ARM Cortex-A53 @ 1.15Ghz |
| GPU | Mali-400 MP2 |
| RAM | 1.0 GiB DDR3 |
| eMMC | 1× soldered |
| SD | 1× microSD (up to 512GB) slot bootable |
| USB |
2× host ports
|
| Ethernet | 1× 1 Gbps |
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Video interfaces |
1×
HDMI
|
| Display I/O |
1× MIPI-DSI (Display Serial Interface)
|
| Audio |
1× audio output
1× S/PDIF output
1× I2S
1× microphone-in
|
| Camera I/O | 1× camera interfaces |
| GPIOs |
40× GPIOs
1× PWM
|
| Pin Header |
Raspberry Pi HAT
|
| Embedded I/O |
3× I2C
2× SPI
3× UART
|
| Generic Peripherals |
IR receiver
|
Physical Aspects
| Power Requirements |
5.0
V DC
1.0A
–2.0A
|
|---|---|
| Battery | - |
| Dimensions | 64mm x 60mm x 13mm |
| Form Factor | Unknown |
| Mounting holes | No |
Software
| Linux |
Yes
|
|---|---|
| Android | - |
| Windows | - |
Certifications and conformity
(No information available)
Links
Add any links to relevant datasheets and schematics here.No links were added yet.
Availability
The reference price is (US) $25.0For purchase information, please refer to the official website .
