PicoCoreMX7ULP
FS Elektronik SystemeThe PicoCoreMX7ULP is a computer-on-module based on the NXP i.MX 7ULP ARM CPU. The 35 x 40mm module comes with up to 1GB LPDDR3 RAM, 64MB SPI flash, and 32GB eMMC flash on-board. Interfaces include WiFi, Bluetooth, 5x serial, USB2.0 OTG, 3x I2C, and MIPI-DSI.
📅 Added on February 15, 2019
🔗 Official website
🛠️ Edit source (see our guide)
Hardware Specifications (Start Comparison)
Manufacturer | FS Elektronik Systeme |
---|---|
SoC | NXP i.MX7ULP |
CPU | 2× ARM Cortex-A7 @ 720Mhz |
GPU | 3D, 2D |
RAM | 1.0 GiB DDR3L |
eMMC | 1× soldered |
SD | 1× SD slot bootable |
USB |
1x USB-OTG
|
Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
Bluetooth |
On-board Bluetooth (4.2)
|
Video interfaces | |
Display I/O |
1× MIPI-DSI (Display Serial Interface)
|
Audio |
1× audio output
1× line-in
1× microphone-in
|
Camera I/O | - |
GPIOs | 72× GPIOs |
Pin Header | none / custom |
Embedded I/O |
3× I2C
1× SPI
5× UART
|
Generic Peripherals | - |
Physical Aspects
Power Requirements |
5.0
V DC
1.0A
|
---|---|
Battery | - |
Dimensions | 40mm x 35mm |
Form Factor | Unknown |
Mounting holes | No |
Software
Linux |
Yes
Yocto-based (with U-Boot) |
---|---|
Android | - |
Windows | - |
Other | FreeRTOS |
Certifications and conformity
(No information available)
Links
Add any links to relevant datasheets and schematics here.No links were added yet.