Myon I
Keith and KoepThe Myon I is the first in a family of “Myon SOM” modules. It’s based on the 64-bit Snapdragon 410E SoC and includes up to 8GB LPDDR3 and 1GB eMMC, plus LVDS, MIPI CSI/DSI, USB, audio in/out, and numerous software-configurable GPIOs, as well as on-board WiFi, BT, and GPS.
📅 Added on August 06, 2019
🔗 Official website
🛠️ Edit source (see our guide)
Hardware Specifications (Start Comparison)
| Manufacturer | Keith and Koep |
|---|---|
| SoC | Qualcomm Snapdragon 410E |
| CPU | 4× ARM Cortex-A53 @ 1.2Ghz |
| GPU | Qualcomm Adreno 306 |
| RAM | 8.0 GiB DDR3L |
| eMMC | 1× soldered |
| SD | 1× Other format slot bootable |
| USB |
1x USB-OTG
|
| Wi-Fi |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n |
| Bluetooth |
On-board Bluetooth (4.1)
|
| Video interfaces | |
| Display I/O |
1× LVDS
1× MIPI-DSI (Display Serial Interface)
|
| Audio |
3× audio outputs
2× I2S
3× microphone-in
|
| Camera I/O | 2× camera interfaces |
| GPIOs | 8× GPIOs |
| Pin Header | none / custom |
| Embedded I/O |
6× I2C
6× SPI
2× UART
|
| Generic Peripherals | - |
Physical Aspects
| Power Requirements |
4.4
– 6.2
V DC
|
|---|---|
| Battery | yes |
| Dimensions | 48mm x 32mm x 4mm |
| Form Factor | Unknown |
| Mounting holes | No |
| Temperature | -25.0°C to 85.0°C |
Software
| Linux |
Yes
|
|---|---|
| Android | Android |
| Windows | 10 IoT Core |
Certifications and conformity
Links
Add any links to relevant datasheets and schematics here.No links were added yet.
