OSD32MP15x SiP
Octavo SystemsThe OSD32MP15x is an 18 x 18mm SiP (system-in-package) that integrates an STMicroelectronics STM32MP1 SoC, DDR3, EEPROM, oscillator, and more than 100Mbps passive components in a chip-like BGA package. I/O includes SDIO, display, SPDIF, GbE, USB, GPIO, analog, and more.
📅 Added on March 04, 2019
🔗 Official website
🛠️ Edit source (see our guide)
Hardware Specifications (Start Comparison)
| Manufacturer | Octavo Systems |
|---|---|
| SoC | STMicroelectronics STM32MP15x |
| CPU | 2× ARM Cortex-A7 @ 650Mhz |
| GPU | Vivante (3D GPU; OpenGL ES 2.0) |
| RAM | 1.0 GiB DDR3L |
| eMMC | 1× soldered |
| SD | 1× Other format slot bootable |
| USB |
3× host ports
3x USB-OTG
|
| Ethernet | 1× 1 Gbps |
| Video interfaces | |
| Display I/O |
1× MIPI-DSI (Display Serial Interface)
1× DPI (Display Parallel Interface)
|
| Audio |
1× audio output
4× S/PDIF output
3× I2S
|
| Camera I/O | 1× camera interfaces |
| GPIOs |
148× GPIOs
2× ADC
2× PWM
|
| Pin Header | none / custom |
| Embedded I/O |
6× I2C
6× SPI
4× UART
2× CANbus
|
| Generic Peripherals | - |
Physical Aspects
| Power Requirements |
2.8
– 5.5
V DC
|
|---|---|
| Battery | Supports 1S Li-Ion/Li-Po |
| Dimensions | 18mm x 18mm |
| Form Factor | Unknown |
| Mounting holes | No |
| Temperature | -40.0°C to 85.0°C |
Software
| Linux |
Yes
OpenST |
|---|---|
| Android | - |
| Windows | - |
| Other | STM32 Cortex-M4 support |
Certifications and conformity
(No information available)
Links
Add any links to relevant datasheets and schematics here.No links were added yet.