Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Aaeon UP Xtreme i11 vs. Raspberry Pi Foundation Raspberry Pi 3 Model B+ vs. AVNET Ultra96 vs. Nvidia Jetson Nano Developer Kit vs. Scalys Grapeboard
UP Xtreme i11 |
Raspberry Pi 3 Model B+ |
Ultra96 |
Jetson Nano Developer Kit |
Grapeboard |
|
| Manufacturer | Aaeon | Raspberry Pi Foundation | AVNET | Nvidia | Scalys |
| Price | - | $ 35.0 | $ 249.0 | $ 99.0 | $ 209.0 |
| SoC | Intel 11th Gen Core i3/i5/i7, Celeron | Broadcom BCM2837B0 | Xilinx Zynq UltraScale+ ZU3EG A484 | Nvidia Erista | NXP/QorIQ LS1012A |
| CPU | 4× x86 @ 4.4 Ghz | 4× ARM Cortex-A53 @ 1.4 Ghz |
4× ARM Cortex-A53 @ 1.5 Ghz 2× ARM Cortex-R5F @ 533 Mhz |
4× ARM Cortex-A57 MPCore @ 1.43 Ghz | 1× ARM Cortex-A53 @ 800 Mhz |
| GPU | Intel 11th Gen UHD Graphics | VideoCore IV | Mali-400 MP2 | Nvidia Maxwell with 128x CUDA cores | - |
| RAM | 1.0 GiB DDR3 | 2.0 GiB LPDDR4 | 4.0 GiB LPDDR4 | 1.0 GiB DDR3L | |
| eMMC | - | - | 1 × soldered | 1 × soldered | 1 × soldered |
| SD | - | 1 × bootable: True | - | - | - |
| USB |
4 × host ports 1 of which are Type-C 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
3 × host ports 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 2.5 Gbps wake on lan supported
|
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
| Bluetooth | - | onboard | onboard | - | onboard |
| Modem | onboard | - | - | - | - |
| Camera | - | up to 1 x inputs | - | up to 1 x inputs | - |
| Audio |
1 × outputs 1 × mic-in 1 × I2S |
1 × outputs 1 × I2S |
- |
1 × I2S |
- |
| GPIO | 40 | 40 | 100 | 40 | 26 |
| PWM | - | 1 | - | - | 1 |
| I2C | - | 1 | - | 1 | 1 |
| SPI | - | 1 | - | 1 | 1 |
| UART | 1 | 1 | - | 1 | 2 |
| Pin header | - |
HAT (Raspberry Pi) |
- | - |
HAT (Raspberry Pi) |
| Form factor | - | Raspberry Pi | 96boards CE v1.0 | - | - |
| Dimensions | 122 mm x 120 mm | 85 mm x 56 mm x 17 mm | 85 mm x 54 mm x 10 mm | 100 mm x 80 mm x 29 mm | 86 mm x 56 mm x 22 mm |
| Temperature | - | 0.0°C - 45.0°C | - | - | - |
| Software |
Linux: True (mainline) Windows: 10 |
Linux: True (mainline) Windows: 10 IoT Core |
Linux: True | Linux: True | Linux: True |