Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
ADL Embedded Solutions ADLE3900SEC vs. Arduino Arduino TRE vs. VersaLogic Harrier vs. Litemax AECX-V1K1 vs. ADL Embedded Solutions ADLE3900HDC vs. Nvidia Jetson TX2 vs. Xunlong Software Orange Pi Zero Plus 2 (H5)
ADLE3900SEC |
Arduino TRE |
Harrier |
AECX-V1K1 |
ADLE3900HDC |
Jetson TX2 |
Orange Pi Zero Plus 2 (H5) |
|
| Manufacturer | ADL Embedded Solutions | Arduino | VersaLogic | Litemax | ADL Embedded Solutions | Nvidia | Xunlong Software |
| Price | - | - | - | - | - | $ 549.0 | $ 20.0 |
| SoC | Intel Atom E39xx | TI AM335x | Intel Atom E39xx (dual 1.3GHz or quad 1.6GHz) | AMD Ryzen Embedded V1000 | Intel Atom E39xx | Nvidia Tegra X2 | AllWinner H5 |
| CPU | 4× x86 @ 2.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 2× x86 @ 1.3 Ghz | 4× x86 @ 3.35 Ghz | 4× x86 @ 2.0 Ghz |
4× ARM Cortex-A57 @ 2.0 Ghz 2× Nvidia Denver 2 @ 2.0 Ghz |
4× ARM Cortex-A53 @ 1.2 Ghz |
| GPU | Intel HD Graphics 505 | SGX530 | Intel HD Graphics 500 | AMD VEGA | Intel HD Graphics 505 | Nvidia Pascal (256 cores, 1300MHz) | Mali-450 |
| RAM | 4.0 GiB DDR4 | 1.0 GiB | 2.0 GiB DDR3L with ECC | 8.0 GiB LPDDR4 | 8.0 GiB LPDDR4 | 1.0 GiB DDR3 | |
| eMMC | - | 1 × soldered | 1 × soldered | - | 1 × soldered | 1 × soldered | 1 × soldered |
| USB | 6 × host ports |
4 × host ports 1 of which support USB-OTG |
5 × host ports | 5 × host ports | 8 × host ports | 2 × host ports |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi | - | - | - | - | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | - | - | - | - | - | onboard | onboard |
| Camera | - | - | - | - | - | up to 1 x inputs | up to 1 x inputs |
| Audio | - |
1 × outputs 1 × line-in |
- |
1 × line-in |
- |
1 × I2S |
1 × outputs 1 × mic-in |
| GPIO | - | 12 | 8 | 8 | 8 | 400 | 26 |
| PWM | - | 1 | - | - | - | - | 1 |
| ADC | - | 1 | - | - | - | - | - |
| I2C | - | - | 1 | - | - | 1 | 1 |
| SPI | - | - | - | - | - | 1 | 1 |
| UART | - | - | 2 | 1 | - | 1 | 1 |
| Pin header | - | Shield (Arduino) | - | - | - | - |
HAT (Raspberry Pi) |
| Dimensions | 75 mm x 75 mm | 115 mm x 105 mm x 25 mm | 89 mm x 55 mm x 27 mm | 146 mm x 102 mm | 147 mm x 102 mm | 50 mm x 87 mm x 6 mm | 48 mm x 46 mm x 12 mm |
| Temperature | -20.0°C - 70.0°C | - | -40.0°C - 85.0°C | 0.0°C - 60.0°C | -20.0°C - 70.0°C | - | -10.0°C - 65.0°C |
| Software |
Linux: True (mainline) Windows: 10 |
Linux: True |
Linux: True (mainline) Windows: Windows Embedded |
Linux: True (mainline) Windows: 10 |
Linux: True (mainline) Windows: yes |
Linux: True | Linux: True |