Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Alorium Evo M51 vs. ADL Embedded Solutions ADLE3900SEC vs. Arduino Arduino TRE vs. TechNexion PICO-IMX6UL vs. Litemax AECX-V1K1 vs. Nvidia Jetson TX2 vs. Xunlong Software Orange Pi Zero Plus 2 (H5)
Evo M51 |
ADLE3900SEC |
Arduino TRE |
PICO-IMX6UL |
AECX-V1K1 |
Jetson TX2 |
Orange Pi Zero Plus 2 (H5) |
|
| Manufacturer | Alorium | ADL Embedded Solutions | Arduino | TechNexion | Litemax | Nvidia | Xunlong Software |
| Price | $ 97.0 | - | - | - | - | $ 549.0 | $ 20.0 |
| SoC | Microchip SAMD51 | Intel Atom E39xx | TI AM335x | NXP i.MX6 UltraLite | AMD Ryzen Embedded V1000 | Nvidia Tegra X2 | AllWinner H5 |
| CPU | 1× ARM Cortex-M4 @ 120 Mhz | 4× x86 @ 2.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 1× ARM Cortex-A7 @ 530 Mhz | 4× x86 @ 3.35 Ghz |
4× ARM Cortex-A57 @ 2.0 Ghz 2× Nvidia Denver 2 @ 2.0 Ghz |
4× ARM Cortex-A53 @ 1.2 Ghz |
| GPU | - | Intel HD Graphics 505 | SGX530 | - | AMD VEGA | Nvidia Pascal (256 cores, 1300MHz) | Mali-450 |
| RAM | 201.3 KiB | 4.0 GiB DDR4 | 1.0 GiB | 1.0 GiB | 8.0 GiB LPDDR4 | 1.0 GiB DDR3 | |
| eMMC | 1 × soldered | - | 1 × soldered | 1 × soldered | - | 1 × soldered | 1 × soldered |
| USB | - | 6 × host ports |
4 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
5 × host ports | 2 × host ports |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 10/100
|
1× 10/100
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
||
| Wi-Fi | - | - | - | - | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | - | - | - | - | - | onboard | onboard |
| Camera | - | - | - | - | - | up to 1 x inputs | up to 1 x inputs |
| Audio | - | - |
1 × outputs 1 × line-in |
- |
1 × line-in |
1 × I2S |
1 × outputs 1 × mic-in |
| GPIO | 55 | - | 12 | 9 | 8 | 400 | 26 |
| PWM | - | - | 1 | 1 | - | - | 1 |
| ADC | 8 | - | 1 | - | - | - | - |
| I2C | 1 | - | - | - | - | 1 | 1 |
| SPI | - | - | - | - | - | 1 | 1 |
| UART | 1 | - | - | - | 1 | 1 | 1 |
| CAN | - | - | - | 1 | - | - | - |
| Pin header | - | - | Shield (Arduino) | - | - | - |
HAT (Raspberry Pi) |
| Dimensions | 56 mm x 33 mm | 75 mm x 75 mm | 115 mm x 105 mm x 25 mm | 36 mm x 25 mm x 4 mm | 146 mm x 102 mm | 50 mm x 87 mm x 6 mm | 48 mm x 46 mm x 12 mm |
| Temperature | - | -20.0°C - 70.0°C | - | - | 0.0°C - 60.0°C | - | -10.0°C - 65.0°C |
| Software | - |
Linux: True (mainline) Windows: 10 |
Linux: True | Linux: True |
Linux: True (mainline) Windows: 10 |
Linux: True | Linux: True |