Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Alorium Evo M51 vs. Arduino Arduino TRE vs. TechNexion PICO-IMX6UL vs. VersaLogic Harrier vs. Litemax AECX-V1K1 vs. Nvidia Jetson TX2 vs. Xunlong Software Orange Pi Zero Plus 2 (H5)
Evo M51 |
Arduino TRE |
PICO-IMX6UL |
Harrier |
AECX-V1K1 |
Jetson TX2 |
Orange Pi Zero Plus 2 (H5) |
|
| Manufacturer | Alorium | Arduino | TechNexion | VersaLogic | Litemax | Nvidia | Xunlong Software |
| Price | $ 97.0 | - | - | - | - | $ 549.0 | $ 20.0 |
| SoC | Microchip SAMD51 | TI AM335x | NXP i.MX6 UltraLite | Intel Atom E39xx (dual 1.3GHz or quad 1.6GHz) | AMD Ryzen Embedded V1000 | Nvidia Tegra X2 | AllWinner H5 |
| CPU | 1× ARM Cortex-M4 @ 120 Mhz | 1× ARM Cortex-A8 @ 1.0 Ghz | 1× ARM Cortex-A7 @ 530 Mhz | 2× x86 @ 1.3 Ghz | 4× x86 @ 3.35 Ghz |
4× ARM Cortex-A57 @ 2.0 Ghz 2× Nvidia Denver 2 @ 2.0 Ghz |
4× ARM Cortex-A53 @ 1.2 Ghz |
| GPU | - | SGX530 | - | Intel HD Graphics 500 | AMD VEGA | Nvidia Pascal (256 cores, 1300MHz) | Mali-450 |
| RAM | 201.3 KiB | 1.0 GiB | 1.0 GiB | 2.0 GiB DDR3L with ECC | 8.0 GiB LPDDR4 | 1.0 GiB DDR3 | |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | - | 1 × soldered | 1 × soldered |
| USB | - |
4 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
5 × host ports | 5 × host ports | 2 × host ports |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 10/100
|
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
||
| Wi-Fi | - | - | - | - | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | - | - | - | - | - | onboard | onboard |
| Camera | - | - | - | - | - | up to 1 x inputs | up to 1 x inputs |
| Audio | - |
1 × outputs 1 × line-in |
- | - |
1 × line-in |
1 × I2S |
1 × outputs 1 × mic-in |
| GPIO | 55 | 12 | 9 | 8 | 8 | 400 | 26 |
| PWM | - | 1 | 1 | - | - | - | 1 |
| ADC | 8 | 1 | - | - | - | - | - |
| I2C | 1 | - | - | 1 | - | 1 | 1 |
| SPI | - | - | - | - | - | 1 | 1 |
| UART | 1 | - | - | 2 | 1 | 1 | 1 |
| CAN | - | - | 1 | - | - | - | - |
| Pin header | - | Shield (Arduino) | - | - | - | - |
HAT (Raspberry Pi) |
| Dimensions | 56 mm x 33 mm | 115 mm x 105 mm x 25 mm | 36 mm x 25 mm x 4 mm | 89 mm x 55 mm x 27 mm | 146 mm x 102 mm | 50 mm x 87 mm x 6 mm | 48 mm x 46 mm x 12 mm |
| Temperature | - | - | - | -40.0°C - 85.0°C | 0.0°C - 60.0°C | - | -10.0°C - 65.0°C |
| Software | - | Linux: True | Linux: True |
Linux: True (mainline) Windows: Windows Embedded |
Linux: True (mainline) Windows: 10 |
Linux: True | Linux: True |