Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Arduino Arduino TRE vs. BeagleBoard.org BeagleBone AI vs. SECO UDOO Neo vs. Raspberry Pi Foundation Raspberry Pi Zero 2 W
Arduino TRE |
BeagleBone AI |
UDOO Neo |
Raspberry Pi Zero 2 W |
|
| Manufacturer | Arduino | BeagleBoard.org | SECO | Raspberry Pi Foundation |
| Price | - | $ 118.0 | $ 99.0 | $ 15.0 |
| SoC | TI AM335x | TI AM5729 | NXP i.MX6 SoloX | Broadcom BCM2710A1 |
| CPU | 1× ARM Cortex-A8 @ 1.0 Ghz | 2× ARM Cortex-A15 @ 1.5 Ghz | 1× ARM Cortex-A9 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.0 Ghz |
| GPU | SGX530 | 2x SGX544 (2D); 2x GC320 (2D); 4x EVE cores | Vivante | VideoCore IV |
| RAM | 1.0 GiB | 1.0 GiB | 1.0 GiB | 512.0 MiB DDR3 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | - |
| SD | - | - | - | 1 × bootable: True |
| USB |
4 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
| Ethernet |
1× 10/100
|
1× 1 Gbps
|
1× 10/100
|
|
| Wi-Fi | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | - | onboard | onboard | onboard |
| Camera | - | - | - | up to 1 x inputs |
| Audio |
1 × outputs 1 × line-in |
- | - |
1 × outputs 1 × I2S |
| GPIO | 12 | 65 | 36 | 40 |
| PWM | 1 | - | 1 | 1 |
| ADC | 1 | - | 1 | - |
| I2C | - | 2 | - | 1 |
| SPI | - | 1 | - | 1 |
| UART | - | 5 | - | 1 |
| Pin header | Shield (Arduino) | - | Shield (Arduino) |
HAT (Raspberry Pi) |
| Form factor | - | - | - | Raspberry Pi Zero |
| Dimensions | 115 mm x 105 mm x 25 mm | 86 mm x 53 mm | - | 65 mm x 30 mm x 5 mm |
| Temperature | - | 0.0°C - 70.0°C | - | 0.0°C - 50.0°C |
| Software | Linux: True |
Linux: True Android: (tbd) |
Linux: True Android: 4.4 |
Linux: True (mainline) |