Board Technical Specifications Comparison

Add boards using the dropdown below, and compare their specs side by side.

Arduino Arduino TRE vs. LattePanda LattePanda Delta 432 vs. FriendlyElec NanoPi M1 Plus vs. Raspberry Pi Foundation Raspberry Pi Zero 2 W

	× Arduino TRE	× LattePanda Delta 432	× NanoPi M1 Plus	× Raspberry Pi Zero 2 W
Manufacturer	Arduino	LattePanda	FriendlyElec	Raspberry Pi Foundation
Price	-	$ 188.0	$ 30.0	$ 15.0
SoC	TI AM335x	Intel Celeron N4100	AllWinner H3	Broadcom BCM2710A1
CPU	1× ARM Cortex-A8 @ 1.0 Ghz	4× Intel Gemini Lake @ 2.4 Ghz	4× ARM Cortex-A7 @ 1.2 Ghz	4× ARM Cortex-A53 @ 1.0 Ghz
GPU	SGX530	Intel HD Graphics 600	Mali-400 MP2	VideoCore IV
RAM	1.0 GiB	4.0 GiB LPDDR4	1.0 GiB DDR3	512.0 MiB DDR3
eMMC	1 × soldered	1 × soldered	1 × soldered	-
SD	-	-	-	1 × bootable: True
USB	4 × host ports 1 of which support USB-OTG	3 × host ports 1 of which support USB-OTG	3 × host ports 1 of which support USB-OTG	1 × host port 1 of which support USB-OTG
Ethernet	1× 10/100	1× 1 Gbps wake on lan supported	1× 1 Gbps
Wi-Fi	-	On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac	On-board Wi-Fi without external antenna 2.4Ghz b/g/n	On-board Wi-Fi without external antenna 2.4Ghz b/g/n
Bluetooth	-	onboard	onboard	onboard
Camera	-	-	up to 1 x inputs	up to 1 x inputs
Audio	1 × outputs 1 × line-in	1 × outputs 1 × I2S	1 × outputs 1 × spdif-out 1 × I2S	1 × outputs 1 × I2S
GPIO	12	100	40	40
PWM	1	-	1	1
ADC	1	-	-	-
I2C	-	1	2	1
SPI	-	1	2	1
UART	-	1	3	1
Pin header	Shield (Arduino)	Shield (Arduino)	HAT (Raspberry Pi)	HAT (Raspberry Pi)
Form factor	-	-	-	Raspberry Pi Zero
Dimensions	115 mm x 105 mm x 25 mm	130 mm x 90 mm x 14 mm	64 mm x 60 mm x 15 mm	65 mm x 30 mm x 5 mm
Temperature	-	-	-	0.0°C - 50.0°C
Software	Linux: True	Linux: True (mainline) Android: x86 Windows: 10	Linux: True Android: Android	Linux: True (mainline)