Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
ASUS Tinker Board vs. Raspberry Pi Foundation Raspberry Pi 5 vs. Avnet MaaXBoard Mini vs. Xunlong Software Orange Pi One vs. Forlinx OKMX6Q-C SBC
Tinker Board |
Raspberry Pi 5 |
MaaXBoard Mini |
Orange Pi One |
OKMX6Q-C SBC |
|
| Manufacturer | ASUS | Raspberry Pi Foundation | Avnet | Xunlong Software | Forlinx |
| Price | $ 69.0 | $ 60.0 | $ 73.0 | $ 10.0 | - |
| SoC | Rockchip RK3288 | Broadcom BCM2712 | NXP i.MX8M Mini | AllWinner H3 | NXP i.MX6Quad |
| CPU | 4× ARM Cortex-A17 @ 1.8 Ghz | 4× ARM Cortex-A76 @ 2.4 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A7 @ 1.2 Ghz | 4× ARM Cortex-A9 @ 1.0 Ghz |
| GPU | Mali-T764 | VideoCore VII | GC NanoUltra (3D), GC320 (2D) | Mali-400 MP2 | Vivante GC355 / Vivante GC320 |
| Onboard MCU | - | 1 x Raspberry Pi RP1 | - | - | - |
| RAM | 2.0 GiB DDR3L | 8.0 GiB LPDDR4 @ 4267MHz | 2.0 GiB DDR4 | 1.0 GiB DDR3 | 1.0 GiB |
| eMMC | 1 × soldered | - | 1 × soldered | 1 × soldered | 1 × soldered |
| SD | - | 1 × bootable: True | - | - | - |
| USB | 4 × host ports |
5 × host ports 1 × device port 1 of which are Type-C |
4 × host ports |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n/ax 5Ghz a/n/ac/ax |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | onboard | onboard | - | - |
| Camera | up to 1 x inputs | up to 2 x inputs | up to 1 x inputs | up to 1 x inputs | up to 1 x inputs |
| Audio |
1 × outputs 1 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 1 × I2S |
1 × outputs 1 × line-in |
- |
1 × outputs 1 × mic-in 1 × I2S |
| GPIO | 40 | 26 | 40 | 40 | 19 |
| PWM | 3 | 4 | 4 | 1 | 4 |
| I2C | 2 | 2 | 4 | 1 | 3 |
| SPI | 2 | 2 | 3 | 1 | 3 |
| UART | 4 | 1 | 4 | 1 | 5 |
| Pin header |
HAT (Raspberry Pi) |
HAT (Raspberry Pi) |
HAT (Raspberry Pi) |
HAT (Raspberry Pi) |
- |
| Form factor | Raspberry Pi | Raspberry Pi | - | - | - |
| Dimensions | 86 mm x 54 mm x 18 mm | 85 mm x 56 mm x 20 mm | 85 mm x 56 mm x 17 mm | 69 mm x 48 mm x 20 mm | 130 mm x 190 mm |
| Temperature | - | 0.0°C - 50.0°C | 0.0°C - 70.0°C | - | 0.0°C - 70.0°C |
| Software |
Linux: True Android: 6.0 |
Linux: True (mainline) |
Linux: True Android: 9.0 |
Linux: True Android: 4.4 |
Linux: True Android: 4.2 |