Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Avnet MaaXBoard Mini vs. FriendlyElec NanoPi K2 vs. MYIR Tech MYD-CZU3EG vs. Quantum Engineering Hackboard 2 vs. Geniatech Developer Board 4 V3
MaaXBoard Mini |
NanoPi K2 |
MYD-CZU3EG |
Hackboard 2 |
Developer Board 4 V3 |
|
| Manufacturer | Avnet | FriendlyElec | MYIR Tech | Quantum Engineering | Geniatech |
| Price | $ 73.0 | $ 40.0 | $ 659.0 | $ 99.0 | $ 119.0 |
| SoC | NXP i.MX8M Mini | Amlogic S905 | Xilinx Zynq UltraScale+ ZU3EG | Intel Celeron N4020 | Qualcomm Snapdragon 410E |
| CPU | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A53 @ 1.5 Ghz | 4× ARM Cortex-A53 @ 1.2 Ghz | 2× x86 @ 2.8 Ghz | 4× ARM Cortex-A53 @ 1.2 Ghz |
| GPU | GC NanoUltra (3D), GC320 (2D) | Mali-450 MP | Mali-400MP2 | Intel UHD Graphics 600 | Qualcomm Adreno A306 (3D) |
| RAM | 2.0 GiB DDR4 | 2.0 GiB | 4.0 GiB DDR4 | 4.0 GiB DDR4 | 2.0 GiB DDR3 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB | 4 × host ports |
4 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
3 × host ports |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
| Bluetooth | onboard | onboard | - | onboard | onboard |
| Modem | - | - | - | onboard | - |
| Camera | up to 1 x inputs | - | - | up to 1 x inputs | up to 1 x inputs |
| Audio |
1 × outputs 1 × line-in |
1 × spdif-out 1 × I2S |
- |
1 × outputs 1 × mic-in |
2 × outputs 1 × I2S |
| GPIO | 40 | 40 | - | - | 12 |
| PWM | 4 | 1 | - | - | - |
| ADC | - | 1 | - | - | 16 |
| I2C | 4 | 1 | - | - | 2 |
| SPI | 3 | - | - | - | 1 |
| UART | 4 | 1 | 1 | - | 1 |
| CAN | - | - | 1 | - | - |
| Pin header |
HAT (Raspberry Pi) |
- | - |
HAT (Raspberry Pi) |
- |
| Dimensions | 85 mm x 56 mm x 17 mm | 85 mm x 56 mm x 14 mm | 195 mm x 124 mm | 120 mm x 80 mm | 85 mm x 60 mm x 12 mm |
| Temperature | 0.0°C - 70.0°C | - | 0.0°C - 70.0°C | - | -25.0°C - 85.0°C |
| Software |
Linux: True Android: 9.0 |
Linux: True Android: 5.1 |
Linux: True |
Linux: True (mainline) Windows: 10 |
Linux: True Android: 6.0 Windows: 10 IoT Core |