Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Axiomtek PICO317 vs. SolidRun i.MX8M Plus SoM vs. LinkSprite pcDuino2 vs. Keith and Koep Trizeps VIII mini vs. Xunlong Software Orange Pi Zero vs. Raspberry Pi Foundation Raspberry Pi Compute Module 4
PICO317 |
i.MX8M Plus SoM |
pcDuino2 |
Trizeps VIII mini |
Orange Pi Zero |
Raspberry Pi Compute Module 4 |
|
| Manufacturer | Axiomtek | SolidRun | LinkSprite | Keith and Koep | Xunlong Software | Raspberry Pi Foundation |
| Price | - | - | $ 59.0 | - | $ 9.0 | $ 25.0 |
| SoC | Intel Atom x5-E3940 | NXP i.MX8M Plus Dual/Quad | AllWinner A10 | NXP i.MX 8M Mini | AllWinner H2+ | Broadcom BCM2711 |
| CPU | 4× x86 @ 1.6 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A7 @ 1.2 Ghz | 4× ARM Cortex-A72 @ 1.5 Ghz |
| GPU | Intel HD Graphics 500 | Vivante GC7000UL | OpenGL ES2.0, OpenVG 1.1 Mali 400 core | - | Mali-400 MP2 @600MHz | VideoCore VI |
| RAM | 8.0 GiB LPDDR4 | 1.0 GiB DDR3 | 4.0 GiB LPDDR4 | - | 8.0 GiB LPDDR4 | |
| eMMC | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
5 × host ports 1 of which are Type-C |
2 × host ports |
1 × host port 1 of which support USB-OTG |
- |
3 × host ports 1 of which support USB-OTG |
1 × host port |
| Ethernet |
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
1× 10/100 supports passive and active PoE
|
1× 1 Gbps
|
| Wi-Fi | - | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
| Bluetooth | - | - | - | onboard | - | onboard |
| Camera | - | up to 3 x inputs | - | up to 1 x inputs | - | up to 2 x inputs |
| Audio |
1 × outputs 1 × line-in |
1 × spdif-out 18 × I2S |
- |
2 × outputs 2 × line-in 1 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 1 × mic-in 1 × spdif-out |
- |
| GPIO | - | 75 | 12 | 1 | 26 | 28 |
| PWM | - | - | 1 | 1 | 1 | - |
| ADC | - | - | 1 | 1 | - | - |
| I2C | - | - | - | 2 | 2 | 6 |
| SPI | - | 1 | - | 1 | 1 | 5 |
| UART | 2 | 3 | - | 4 | 1 | 6 |
| CAN | - | 2 | - | - | - | - |
| Pin header | - | - | Shield (Arduino) | - |
HAT (Raspberry Pi) |
- |
| Form factor | Pico-ITX | - | - | - | - | Raspberry Pi Compute Module 4 |
| Dimensions | 100 mm x 72 mm | 47 mm x 30 mm | - | 68 mm x 37 mm x 7 mm | 48 mm x 46 mm x 17 mm | 55 mm x 40 mm |
| Temperature | -40.0°C - 70.0°C | -40.0°C - 85.0°C | - | -25.0°C - 85.0°C | - | 0.0°C - 80.0°C |
| Software |
Linux: True (mainline) Windows: Windows (x86_64) |
Linux: True Android: Android |
Linux: True Android: 4.2 |
Linux: True Android: 9 Windows: 10 IoT Core |
Linux: True Android: Android |
Linux: True (mainline) |