Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
BeagleBoard.org BeagleBone AI vs. Kobol Innovations Helios64 vs. FriendlyElec NanoPi Fire3 vs. Geniatech XPI-S905X vs. MediaTek LinkIt Smart 7688 vs. Onion Omega2 Pro
BeagleBone AI |
Helios64 |
NanoPi Fire3 |
XPI-S905X |
LinkIt Smart 7688 |
Omega2 Pro |
|
| Manufacturer | BeagleBoard.org | Kobol Innovations | FriendlyElec | Geniatech | MediaTek | Onion |
| Price | $ 118.0 | $ 189.0 | $ 35.0 | $ 35.0 | $ 13.0 | $ 49.0 |
| SoC | TI AM5729 | Rockchip RK3399 | Samsung S5P6818 | Amlogic S905X | MediaTek MT7688AN | Onion Omega2+ |
| CPU | 2× ARM Cortex-A15 @ 1.5 Ghz |
2× ARM Cortex-A72 @ 2.0 Ghz 4× ARM Cortex-A53 @ 1.5 Ghz |
8× ARM Cortex-A53 @ 1.4 Ghz | 4× ARM Cortex-A53 @ 1.5 Ghz | 1× MIPS 24KEc @ 580 Mhz | 1× MIPS @ 580 Mhz |
| GPU | 2x SGX544 (2D); 2x GC320 (2D); 4x EVE cores | Mali-T860 MP4 | Mali-400 MP | Mali 450 | - | - |
| RAM | 1.0 GiB | 4.0 GiB LPDDR4 | 1.0 GiB DDR3 | 4.0 GiB | - | |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which support USB-OTG |
3 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
4 × host ports | 1 × host port | 1 × host port |
| Ethernet |
1× 1 Gbps
|
1× 2.5 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 10/100
|
1× 10/100
|
1× 10/100
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- | - | On-board Wi-Fi without external antenna |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | - | - | onboard | - | - |
| Camera | - | - | up to 1 x inputs | - | - | - |
| Audio | - | - | - |
2 × spdif-out 8 × I2S |
1 × outputs 1 × I2S |
1 × I2S |
| GPIO | 65 | 16 | 40 | 40 | 22 | 8 |
| PWM | - | 2 | 3 | 3 | 4 | 2 |
| I2C | 2 | 2 | 2 | 4 | 1 | 1 |
| SPI | 1 | 1 | 1 | - | 2 | 1 |
| UART | 5 | 2 | 3 | 1 | 3 | 2 |
| Pin header | - | - |
HAT (Raspberry Pi) |
HAT (Raspberry Pi) |
- | - |
| Dimensions | 86 mm x 53 mm | 120 mm x 120 mm | 75 mm x 40 mm x 16 mm | 85 mm x 56 mm x 1.6 mm | 56 mm x 26 mm x 13 mm | 73 mm x 44 mm |
| Temperature | 0.0°C - 70.0°C | 0.0°C - 80.0°C | -20.0°C - 80.0°C | -5.0°C - 30.0°C | - | - |
| Software |
Linux: True Android: (tbd) |
Linux: True |
Linux: True Android: 5.1 |
Linux: True Android: 7.1 |
Linux: True | Linux: True |