Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
BeagleBoard.org BeagleBone AI vs. Next Thing Co. CHIP Pro vs. Forlinx iMX RT1052 SBC vs. Arduino Arduino TRE vs. WallysTech DR4029 vs. 8devices Komikan vs. Technologic Systems TS-4900
BeagleBone AI |
CHIP Pro |
iMX RT1052 SBC |
Arduino TRE |
DR4029 |
Komikan |
TS-4900 |
|
| Manufacturer | BeagleBoard.org | Next Thing Co. | Forlinx | Arduino | WallysTech | 8devices | Technologic Systems |
| Price | $ 118.0 | $ 16.0 | $ 45.0 | - | - | $ 29.0 | $ 109.0 |
| SoC | TI AM5729 | AllWinner R8 (Next Thing GR8) | NXP i.MX RT1052 | TI AM335x | Qualcomm IPQ4029 | Realtek RTL8197FS | NXP i.MX6 Solo/Quad |
| CPU | 2× ARM Cortex-A15 @ 1.5 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 1× ARM Cortex-M7 @ 530 Mhz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A7 @ 720 Mhz | 1× MIPS 24Kc @ 1.0 Ghz | 4× ARM Cortex-A9 @ 1.0 Ghz |
| GPU | 2x SGX544 (2D); 2x GC320 (2D); 4x EVE cores | Mali-400 | - | SGX530 | - | - | - |
| RAM | 1.0 GiB | - | 1.0 GiB | 512.0 GiB | - | 2.0 GiB | |
| eMMC | 1 × soldered | 1 × soldered | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
1 × host port | 2 × host ports |
1 × host port 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 10/100
|
1× 10/100
|
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps wake on lan supported
|
||
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
- | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | onboard | - | - | - | onboard | onboard |
| Modem | - | - | - | - | onboard | - | - |
| Camera | - | up to 1 x inputs | up to 1 x inputs | - | - | - | - |
| Audio | - |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 1 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 1 × line-in |
- | - |
1 × I2S |
| GPIO | 65 | 32 | 124 | 12 | 6 | 44 | - |
| PWM | - | 2 | 1 | 1 | - | 1 | - |
| ADC | - | - | 5 | 1 | - | - | - |
| I2C | 2 | 1 | 1 | - | - | 2 | 2 |
| SPI | 1 | 1 | 1 | - | - | 2 | 2 |
| UART | 5 | 2 | 1 | - | 2 | 4 | - |
| CAN | - | - | 1 | - | - | - | 2 |
| Pin header | - | - | - | Shield (Arduino) | - | - | - |
| Dimensions | 86 mm x 53 mm | 45 mm x 30 mm x 3 mm | 104 mm x 81 mm | 115 mm x 105 mm x 25 mm | 115 mm x 105 mm x 16 mm | 38 mm x 21 mm x 4 mm | 55 mm x 75 mm |
| Temperature | 0.0°C - 70.0°C | - | -40.0°C - 85.0°C | - | -40.0°C - 70.0°C | 0.0°C - 55.0°C | -40.0°C - 85.0°C |
| Software |
Linux: True Android: (tbd) |
Linux: True | Linux: True | Linux: True | Linux: True | Linux: True |
Linux: True Android: 4.4 Windows: Embedded |