Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
BeagleBoard.org BeagleBone AI vs. Next Thing Co. CHIP Pro vs. Raspberry Pi Foundation Raspberry Pi Compute Module 4 vs. Geniatech XPI-S905X vs. CubieTech Cubieboard A20 vs. TechNexion PICO-IMX8M
BeagleBone AI |
CHIP Pro |
Raspberry Pi Compute Module 4 |
XPI-S905X |
Cubieboard A20 |
PICO-IMX8M |
|
| Manufacturer | BeagleBoard.org | Next Thing Co. | Raspberry Pi Foundation | Geniatech | CubieTech | TechNexion |
| Price | $ 118.0 | $ 16.0 | $ 25.0 | $ 35.0 | $ 59.0 | $ 51.0 |
| SoC | TI AM5729 | AllWinner R8 (Next Thing GR8) | Broadcom BCM2711 | Amlogic S905X | AllWinner A20 | NXP i.MX8M (Dual, QuadLite, or Quad) |
| CPU | 2× ARM Cortex-A15 @ 1.5 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A72 @ 1.5 Ghz | 4× ARM Cortex-A53 @ 1.5 Ghz | 2× ARM Cortex-A7 @ 1.2 Ghz | 4× ARM Cortex-A53 cores @ 1.5 Ghz |
| GPU | 2x SGX544 (2D); 2x GC320 (2D); 4x EVE cores | Mali-400 | VideoCore VI | Mali 450 | Mali-400 MP2 | Vivante GC7000Lite |
| RAM | 1.0 GiB | - | 8.0 GiB LPDDR4 | 4.0 GiB | 1.0 GiB DDR3 | 4.0 GiB LPDDR4 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port | 4 × host ports |
2 × host ports 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 10/100
|
1× 10/100
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
| Bluetooth | onboard | onboard | onboard | onboard | - | onboard |
| Camera | - | up to 1 x inputs | up to 2 x inputs | - | up to 1 x inputs | up to 1 x inputs |
| Audio | - |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
- |
2 × spdif-out 8 × I2S |
1 × outputs 1 × line-in |
2 × I2S |
| GPIO | 65 | 32 | 28 | 40 | 96 | 1 |
| PWM | - | 2 | - | 3 | - | 4 |
| ADC | - | - | - | - | 1 | - |
| I2C | 2 | 1 | 6 | 4 | - | 3 |
| SPI | 1 | 1 | 5 | - | - | 2 |
| UART | 5 | 2 | 6 | 1 | - | 2 |
| Pin header | - | - | - |
HAT (Raspberry Pi) |
- | - |
| Form factor | - | - | Raspberry Pi Compute Module 4 | - | - | - |
| Dimensions | 86 mm x 53 mm | 45 mm x 30 mm x 3 mm | 55 mm x 40 mm | 85 mm x 56 mm x 1.6 mm | - | 40 mm x 37 mm |
| Temperature | 0.0°C - 70.0°C | - | 0.0°C - 80.0°C | -5.0°C - 30.0°C | - | 0.0°C - 60.0°C |
| Software |
Linux: True Android: (tbd) |
Linux: True | Linux: True (mainline) |
Linux: True Android: 7.1 |
Linux: True Android: 4.2 |
Linux: True Android: Android |