Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
BeagleBoard.org BeagleBone AI vs. Next Thing Co. CHIP Pro vs. Raspberry Pi Foundation Raspberry Pi Compute Module 4 vs. Globalscale Technologies Mochabin-5G vs. FriendlyElec NanoPi M2A
BeagleBone AI |
CHIP Pro |
Raspberry Pi Compute Module 4 |
Mochabin-5G |
NanoPi M2A |
|
| Manufacturer | BeagleBoard.org | Next Thing Co. | Raspberry Pi Foundation | Globalscale Technologies | FriendlyElec |
| Price | $ 118.0 | $ 16.0 | $ 25.0 | $ 110.0 | $ 30.0 |
| SoC | TI AM5729 | AllWinner R8 (Next Thing GR8) | Broadcom BCM2711 | Marvell Armada 7040 | Samsung S5P4418 |
| CPU | 2× ARM Cortex-A15 @ 1.5 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A72 @ 1.5 Ghz | 4× ARM Cortex-A72 @ 1.4 Ghz | 4× ARM Cortex-A53 @ 1.4 Ghz |
| GPU | 2x SGX544 (2D); 2x GC320 (2D); 4x EVE cores | Mali-400 | VideoCore VI | - | Mali-400 MP |
| RAM | 1.0 GiB | - | 8.0 GiB LPDDR4 | 8.0 GiB DDR4 | 1.0 GiB |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port | 2 × host ports |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 10 Gbps 6 ports are copper, 2 ports are SFP wake on lan supported supports passive and active PoE
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac/ax |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | onboard | onboard | onboard | onboard |
| Modem | - | - | - | onboard | - |
| Camera | - | up to 1 x inputs | up to 2 x inputs | - | up to 1 x inputs |
| Audio | - |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
- | - |
1 × outputs 1 × mic-in 1 × I2S |
| GPIO | 65 | 32 | 28 | 1 | 40 |
| PWM | - | 2 | - | - | 1 |
| I2C | 2 | 1 | 6 | - | 1 |
| SPI | 1 | 1 | 5 | - | 1 |
| UART | 5 | 2 | 6 | - | 2 |
| CAN | - | - | - | 1 | - |
| Pin header | - | - | - | - |
HAT (Raspberry Pi) |
| Form factor | - | - | Raspberry Pi Compute Module 4 | Mini-ITX | - |
| Dimensions | 86 mm x 53 mm | 45 mm x 30 mm x 3 mm | 55 mm x 40 mm | 170 mm x 170 mm x 32 mm | 64 mm x 60 mm x 13 mm |
| Temperature | 0.0°C - 70.0°C | - | 0.0°C - 80.0°C | 0.0°C - 70.0°C | - |
| Software |
Linux: True Android: (tbd) |
Linux: True | Linux: True (mainline) | Linux: True (mainline) |
Linux: True Android: 5.1 |