Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
BeagleBoard.org BeagleBone AI vs. Next Thing Co. CHIP Pro vs. Raspberry Pi Foundation Raspberry Pi Compute Module 4 vs. Zepan LicheePi One vs. Technical Solutions Inc. TSCM 283 vs. SECO UDOO Dual Basic
BeagleBone AI |
CHIP Pro |
Raspberry Pi Compute Module 4 |
LicheePi One |
TSCM 283 |
UDOO Dual Basic |
|
| Manufacturer | BeagleBoard.org | Next Thing Co. | Raspberry Pi Foundation | Zepan | Technical Solutions Inc. | SECO |
| Price | $ 118.0 | $ 16.0 | $ 25.0 | $ 6.0 | $ 59.0 | $ 99.0 |
| SoC | TI AM5729 | AllWinner R8 (Next Thing GR8) | Broadcom BCM2711 | AllWinner A13 | NXP i.MX283 | NXP i.MX 6 |
| CPU | 2× ARM Cortex-A15 @ 1.5 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A72 @ 1.5 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 1× ARM926ejs @ 450 Mhz | 2× ARM Cortex-A9 @ 1.0 Ghz |
| GPU | 2x SGX544 (2D); 2x GC320 (2D); 4x EVE cores | Mali-400 | VideoCore VI | Mali 400 | - | Vivante GC 880 + Vivante GC 320 |
| RAM | 1.0 GiB | - | 8.0 GiB LPDDR4 | 1.0 GiB DDR3 | - | 1.0 GiB |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
2 × host ports 2 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 10/100 wake on lan supported
|
|||
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna | - | - |
| Bluetooth | onboard | onboard | onboard | onboard | - | - |
| Camera | - | up to 1 x inputs | up to 2 x inputs | up to 1 x inputs | - | - |
| Audio | - |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
- | 1 × outputs |
2 × outputs 2 × line-in 1 × mic-in 1 × I2S |
1 × outputs 1 × mic-in |
| GPIO | 65 | 32 | 28 | 9 | 8 | 76 |
| PWM | - | 2 | - | - | - | - |
| ADC | - | - | - | - | 2 | 12 |
| I2C | 2 | 1 | 6 | 3 | 2 | - |
| SPI | 1 | 1 | 5 | 3 | 1 | - |
| UART | 5 | 2 | 6 | 3 | 2 | - |
| Pin header | - | - | - | - | - | Shield (Arduino) |
| Form factor | - | - | Raspberry Pi Compute Module 4 | - | - | - |
| Dimensions | 86 mm x 53 mm | 45 mm x 30 mm x 3 mm | 55 mm x 40 mm | 72 mm x 55 mm x 9 mm | 80 mm x 60 mm x 5 mm | - |
| Temperature | 0.0°C - 70.0°C | - | 0.0°C - 80.0°C | - | -40.0°C - 75.0°C | - |
| Software |
Linux: True Android: (tbd) |
Linux: True | Linux: True (mainline) |
Linux: True Android: Android |
Linux: True Android: 2.6 |
Linux: True Android: 4.4 |