Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
BeagleBoard.org BeagleBone AI vs. Raspberry Pi Foundation Raspberry Pi Compute Module 3 vs. DFI BT551/BT553 vs. Kobol Innovations Helios64 vs. Raspberry Pi Foundation Raspberry Pi 5 vs. Onion Omega2 Pro
BeagleBone AI |
Raspberry Pi Compute Module 3 |
BT551/BT553 |
Helios64 |
Raspberry Pi 5 |
Omega2 Pro |
|
| Manufacturer | BeagleBoard.org | Raspberry Pi Foundation | DFI | Kobol Innovations | Raspberry Pi Foundation | Onion |
| Price | $ 118.0 | $ 30.0 | - | $ 189.0 | $ 60.0 | $ 49.0 |
| SoC | TI AM5729 | Broadcom BCM2837 | Intel Atom/Celeron | Rockchip RK3399 | Broadcom BCM2712 | Onion Omega2+ |
| CPU | 2× ARM Cortex-A15 @ 1.5 Ghz | 4× ARM Cortex-A53 @ 1.2 Ghz | 4× x86 @ 2.0 Ghz |
2× ARM Cortex-A72 @ 2.0 Ghz 4× ARM Cortex-A53 @ 1.5 Ghz |
4× ARM Cortex-A76 @ 2.4 Ghz | 1× MIPS @ 580 Mhz |
| GPU | 2x SGX544 (2D); 2x GC320 (2D); 4x EVE cores | VideoCore IV | - | Mali-T860 MP4 | VideoCore VII | - |
| Onboard MCU | - | - | - | - | 1 x Raspberry Pi RP1 | - |
| RAM | 1.0 GiB | 1.0 GiB DDR3 | 4.0 GiB DDR3L | 4.0 GiB LPDDR4 | 8.0 GiB LPDDR4 @ 4267MHz | |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | - | 1 × soldered |
| SD | - | - | - | - | 1 × bootable: True | - |
| USB |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
6 × host ports |
3 × host ports 1 of which support USB-OTG |
5 × host ports 1 × device port 1 of which are Type-C |
1 × host port |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
1× 2.5 Gbps wake on lan supported
|
1× 1 Gbps supports passive and active PoE
|
1× 10/100
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- | - | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n/ax 5Ghz a/n/ac/ax |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | - | - | - | onboard | - |
| Camera | - | up to 2 x inputs | - | - | up to 2 x inputs | - |
| Audio | - | - |
1 × outputs 1 × mic-in |
- |
1 × outputs 1 × I2S |
1 × I2S |
| GPIO | 65 | 48 | 8 | 16 | 26 | 8 |
| PWM | - | 2 | - | 2 | 4 | 2 |
| I2C | 2 | 2 | - | 2 | 2 | 1 |
| SPI | 1 | 2 | 1 | 1 | 2 | 1 |
| UART | 5 | 2 | - | 2 | 1 | 2 |
| Pin header | - |
HAT (Raspberry Pi) |
- | - |
HAT (Raspberry Pi) |
- |
| Form factor | - | Raspberry Pi Compute Module 3 | - | - | Raspberry Pi | - |
| Dimensions | 86 mm x 53 mm | 69 mm x 31 mm x 4 mm | 146 mm x 102 mm | 120 mm x 120 mm | 85 mm x 56 mm x 20 mm | 73 mm x 44 mm |
| Temperature | 0.0°C - 70.0°C | -25.0°C - 80.0°C | -40.0°C - 85.0°C | 0.0°C - 80.0°C | 0.0°C - 50.0°C | - |
| Software |
Linux: True Android: (tbd) |
Linux: True (mainline) Windows: 10 IoT core |
Linux: True (mainline) Windows: 7, 8.1, WES8, 10 IoT Enterprise |
Linux: True | Linux: True (mainline) | Linux: True |