Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
BeagleBoard.org BeagleBone AI vs. Raspberry Pi Foundation Raspberry Pi Compute Module 3 vs. Next Thing Co. CHIP Pro vs. Forlinx iMX RT1052 SBC vs. WallysTech DR4029 vs. 8devices Komikan
BeagleBone AI |
Raspberry Pi Compute Module 3 |
CHIP Pro |
iMX RT1052 SBC |
DR4029 |
Komikan |
|
| Manufacturer | BeagleBoard.org | Raspberry Pi Foundation | Next Thing Co. | Forlinx | WallysTech | 8devices |
| Price | $ 118.0 | $ 30.0 | $ 16.0 | $ 45.0 | - | $ 29.0 |
| SoC | TI AM5729 | Broadcom BCM2837 | AllWinner R8 (Next Thing GR8) | NXP i.MX RT1052 | Qualcomm IPQ4029 | Realtek RTL8197FS |
| CPU | 2× ARM Cortex-A15 @ 1.5 Ghz | 4× ARM Cortex-A53 @ 1.2 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 1× ARM Cortex-M7 @ 530 Mhz | 4× ARM Cortex-A7 @ 720 Mhz | 1× MIPS 24Kc @ 1.0 Ghz |
| GPU | 2x SGX544 (2D); 2x GC320 (2D); 4x EVE cores | VideoCore IV | Mali-400 | - | - | - |
| RAM | 1.0 GiB | 1.0 GiB DDR3 | - | 512.0 GiB | - | |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | - | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port | 2 × host ports |
| Ethernet |
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps supports passive and active PoE
|
|||
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
| Bluetooth | onboard | - | onboard | - | - | onboard |
| Modem | - | - | - | - | onboard | - |
| Camera | - | up to 2 x inputs | up to 1 x inputs | up to 1 x inputs | - | - |
| Audio | - | - |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 1 × mic-in 1 × spdif-out 1 × I2S |
- | - |
| GPIO | 65 | 48 | 32 | 124 | 6 | 44 |
| PWM | - | 2 | 2 | 1 | - | 1 |
| ADC | - | - | - | 5 | - | - |
| I2C | 2 | 2 | 1 | 1 | - | 2 |
| SPI | 1 | 2 | 1 | 1 | - | 2 |
| UART | 5 | 2 | 2 | 1 | 2 | 4 |
| CAN | - | - | - | 1 | - | - |
| Pin header | - |
HAT (Raspberry Pi) |
- | - | - | - |
| Form factor | - | Raspberry Pi Compute Module 3 | - | - | - | - |
| Dimensions | 86 mm x 53 mm | 69 mm x 31 mm x 4 mm | 45 mm x 30 mm x 3 mm | 104 mm x 81 mm | 115 mm x 105 mm x 16 mm | 38 mm x 21 mm x 4 mm |
| Temperature | 0.0°C - 70.0°C | -25.0°C - 80.0°C | - | -40.0°C - 85.0°C | -40.0°C - 70.0°C | 0.0°C - 55.0°C |
| Software |
Linux: True Android: (tbd) |
Linux: True (mainline) Windows: 10 IoT core |
Linux: True | Linux: True | Linux: True | Linux: True |