Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
BeagleBoard.org BeagleBone AI vs. SECO UDOO Neo vs. BeagleBoard.org BeagleBone Black Rev. C vs. Raspberry Pi Foundation Raspberry Pi Zero 2 W
BeagleBone AI |
UDOO Neo |
BeagleBone Black Rev. C |
Raspberry Pi Zero 2 W |
|
| Manufacturer | BeagleBoard.org | SECO | BeagleBoard.org | Raspberry Pi Foundation |
| Price | $ 118.0 | $ 99.0 | $ 45.0 | $ 15.0 |
| SoC | TI AM5729 | NXP i.MX6 SoloX | TI AM3358/9 | Broadcom BCM2710A1 |
| CPU | 2× ARM Cortex-A15 @ 1.5 Ghz | 1× ARM Cortex-A9 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.0 Ghz |
| GPU | 2x SGX544 (2D); 2x GC320 (2D); 4x EVE cores | Vivante | PowerVR SGX530 | VideoCore IV |
| RAM | 1.0 GiB | 1.0 GiB | 1.0 GiB | 512.0 MiB DDR3 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | - |
| SD | - | - | - | 1 × bootable: True |
| USB |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 10/100
|
1× 10/100
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | onboard | - | onboard |
| Camera | - | - | - | up to 1 x inputs |
| Audio | - | - | - |
1 × outputs 1 × I2S |
| GPIO | 65 | 36 | 92 | 40 |
| PWM | - | 1 | - | 1 |
| ADC | - | 1 | - | - |
| I2C | 2 | - | - | 1 |
| SPI | 1 | - | - | 1 |
| UART | 5 | - | - | 1 |
| Pin header | - | Shield (Arduino) | - |
HAT (Raspberry Pi) |
| Form factor | - | - | - | Raspberry Pi Zero |
| Dimensions | 86 mm x 53 mm | - | - | 65 mm x 30 mm x 5 mm |
| Temperature | 0.0°C - 70.0°C | - | - | 0.0°C - 50.0°C |
| Software |
Linux: True Android: (tbd) |
Linux: True Android: 4.4 |
Linux: True Android: 4.4 |
Linux: True (mainline) |