Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
BeagleBoard.org BeagleBone AI vs. Sinovoip Banana Pi BP1-M2 vs. Next Thing Co. CHIP Pro vs. Radxa Rock Pi E vs. Raspberry Pi Foundation Raspberry Pi Compute Module 4 vs. Globalscale Technologies Mochabin-5G vs. FriendlyElec NanoPi M2A
BeagleBone AI |
Banana Pi BP1-M2 |
CHIP Pro |
Rock Pi E |
Raspberry Pi Compute Module 4 |
Mochabin-5G |
NanoPi M2A |
|
| Manufacturer | BeagleBoard.org | Sinovoip | Next Thing Co. | Radxa | Raspberry Pi Foundation | Globalscale Technologies | FriendlyElec |
| Price | $ 118.0 | $ 59.0 | $ 16.0 | $ 24.0 | $ 25.0 | $ 110.0 | $ 30.0 |
| SoC | TI AM5729 | AllWinner A31S | AllWinner R8 (Next Thing GR8) | Rockchip RK3328 | Broadcom BCM2711 | Marvell Armada 7040 | Samsung S5P4418 |
| CPU | 2× ARM Cortex-A15 @ 1.5 Ghz | 4× ARM Cortex-A7 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.3 Ghz | 4× ARM Cortex-A72 @ 1.5 Ghz | 4× ARM Cortex-A72 @ 1.4 Ghz | 4× ARM Cortex-A53 @ 1.4 Ghz |
| GPU | 2x SGX544 (2D); 2x GC320 (2D); 4x EVE cores | PowerVR SGX544MP2 | Mali-400 | Mali-450MP4 | VideoCore VI | - | Mali-400 MP |
| RAM | 1.0 GiB | 1.0 GiB DDR3 | - | 2.0 GiB DDR3 | 8.0 GiB LPDDR4 | 8.0 GiB DDR4 | 1.0 GiB |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port | 2 × host ports |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 10 Gbps 6 ports are copper, 2 ports are SFP wake on lan supported supports passive and active PoE
|
1× 1 Gbps
|
||
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac/ax |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | - | onboard | onboard | onboard | onboard | onboard |
| Modem | - | - | - | - | - | onboard | - |
| Camera | - | - | up to 1 x inputs | - | up to 2 x inputs | - | up to 1 x inputs |
| Audio | - | 1 × outputs |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 9 × spdif-out 1 × I2S |
- | - |
1 × outputs 1 × mic-in 1 × I2S |
| GPIO | 65 | 40 | 32 | 40 | 28 | 1 | 40 |
| PWM | - | - | 2 | 2 | - | - | 1 |
| ADC | - | - | - | 1 | - | - | - |
| I2C | 2 | - | 1 | 1 | 6 | - | 1 |
| SPI | 1 | - | 1 | 1 | 5 | - | 1 |
| UART | 5 | - | 2 | 2 | 6 | - | 2 |
| CAN | - | - | - | - | - | 1 | - |
| Pin header | - | - | - |
HAT (Raspberry Pi) |
- | - |
HAT (Raspberry Pi) |
| Form factor | - | - | - | - | Raspberry Pi Compute Module 4 | Mini-ITX | - |
| Dimensions | 86 mm x 53 mm | - | 45 mm x 30 mm x 3 mm | 65 mm x 56 mm | 55 mm x 40 mm | 170 mm x 170 mm x 32 mm | 64 mm x 60 mm x 13 mm |
| Temperature | 0.0°C - 70.0°C | - | - | - | 0.0°C - 80.0°C | 0.0°C - 70.0°C | - |
| Software |
Linux: True Android: (tbd) |
Linux: True Android: 4.4 |
Linux: True | Linux: True | Linux: True (mainline) | Linux: True (mainline) |
Linux: True Android: 5.1 |