Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Boardcon CM3566 vs. DFI FS053 vs. Libre Computer Libre Computer Board vs. FS Elektronik Systeme armStone A9r2 vs. Ibase IBR210 vs. Raspberry Pi Foundation Raspberry Pi Zero
CM3566 |
FS053 |
Libre Computer Board |
armStone A9r2 |
IBR210 |
Raspberry Pi Zero |
|
| Manufacturer | Boardcon | DFI | Libre Computer | FS Elektronik Systeme | Ibase | Raspberry Pi Foundation |
| Price | - | - | $ 35.0 | $ 313.0 | $ 266.0 | $ 5.0 |
| SoC | Rockchip RK3566 | NXP i.MX6 | Amlogic S905X | NXP i.MX 6 | NXP i.MX8 M Quad, Dual | Broadcom BCM2835 |
| CPU | 4× ARM Cortex-A55 @ 1.8 Ghz | 4× ARM Cortex-A9 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.51 Ghz | 4× ARM Cortex-A9 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.5 Ghz | 1× ARM1176JZF-S @ 1.0 Ghz |
| GPU | Mali-G52 2EE | - | Mali-450 | 3D, 2D 600Mpix/s | Vivante GC7000Lite | VideoCore IV |
| RAM | 8.0 GiB LPDDR4 | 4.0 GiB DDR3L | 1.0 GiB | 4.0 GiB DDR3L | 3.0 GiB LPDDR4 | 1.0 GiB DDR3 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | - |
| SD | - | - | - | - | - | 1 × bootable: True |
| USB |
4 × host ports 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
4 × host ports |
4 × host ports 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n |
On-board Wi-Fi without external antenna | - |
| Bluetooth | onboard | - | - | onboard | onboard | - |
| Modem | onboard | - | - | - | onboard | - |
| Camera | up to 2 x inputs | - | - | up to 1 x inputs | up to 2 x inputs | up to 1 x inputs |
| Audio |
1 × outputs 1 × mic-in 1 × spdif-out |
- |
1 × outputs 1 × spdif-out 1 × I2S |
1 × outputs 1 × line-in 1 × mic-in |
1 × outputs 1 × line-in 1 × mic-in 1 × I2S |
1 × outputs 1 × I2S |
| GPIO | 106 | 8 | 40 | 66 | 8 | 40 |
| PWM | 14 | - | 1 | - | - | 2 |
| ADC | 3 | - | 1 | - | - | - |
| I2C | 4 | - | 1 | 1 | 1 | 1 |
| SPI | 4 | - | 1 | 2 | - | 1 |
| UART | 4 | - | 1 | 5 | 3 | 1 |
| Pin header | - | - |
HAT (Raspberry Pi) |
- | - |
HAT (Raspberry Pi) |
| Form factor | - | Pico-ITX | - | Pico-ITX | - | Raspberry Pi Zero |
| Dimensions | 40 mm x 47 mm | 100 mm x 72 mm | 87 mm x 56 mm x 15 mm | 100 mm x 72 mm x 15 mm | 147 mm x 102 mm | 65 mm x 30 mm x 5 mm |
| Temperature | - | -20.0°C - 70.0°C | - | 0.0°C - 70.0°C | 0.0°C - 70.0°C | 0.0°C - 50.0°C |
| Software |
Linux: True Android: 11 |
Linux: True Android: 5.1 |
Linux: True Android: 7.1 |
Linux: True Windows: WEC 2013 |
Linux: True Android: 9 |
Linux: True (mainline) |