Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Compulab UCM-iMX8M-Mini vs. Raspberry Pi Foundation Raspberry Pi Compute Module 3 vs. Forlinx FET335xS-II SoM vs. Faytech FTA20 vs. FriendlyElec NanoPi M3 vs. PC Engines APU1D4 vs. PC Engines apu2 series
UCM-iMX8M-Mini |
Raspberry Pi Compute Module 3 |
FET335xS-II SoM |
FTA20 |
NanoPi M3 |
APU1D4 |
apu2 series |
|
| Manufacturer | Compulab | Raspberry Pi Foundation | Forlinx | Faytech | FriendlyElec | PC Engines | PC Engines |
| Price | - | $ 30.0 | $ 45.0 | - | $ 35.0 | $ 145.0 | $ 180.0 |
| SoC | NXP i.MX8M Mini DualLite/Dual/Quad | Broadcom BCM2837 | TI Sitara AM3354 | AllWinner A20 | Samsung S5P6818 | AMD G Series T40E | AMD GX-412TC |
| CPU | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A53 @ 1.2 Ghz | 1× ARM Cortex-A8 @ 800 Mhz | 2× ARM Cortex-A7 @ 1.0 Ghz | 8× ARM Cortex-A53 @ 1.4 Ghz | 2× AMD Bobcat @ 1.0 Ghz | 4× AMD Jaguar @ 1.0 Ghz |
| GPU | GC NanoUltra | VideoCore IV | PowerVR SGX530 | Mali-400 | Mali-400 MP | - | - |
| RAM | 4.0 GiB LPDDR4 | 1.0 GiB DDR3 | - | 1.0 GiB DDR3 | 1.0 GiB | 4.0 GiB DDR3 | 4.0 GiB DDR3 with ECC |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB | 2 × host ports |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
4 × host ports | 4 × host ports |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- | - | On-board Wi-Fi without external antenna |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
- | - |
| Bluetooth | onboard | - | - | onboard | onboard | - | - |
| Camera | up to 1 x inputs | up to 2 x inputs | - | - | up to 1 x inputs | - | - |
| Audio |
1 × spdif-out 3 × I2S |
- |
1 × I2S |
1 × outputs 1 × line-in |
1 × outputs 1 × mic-in 1 × I2S |
- | - |
| GPIO | 85 | 48 | 70 | 24 | 40 | 16 | 1 |
| PWM | 4 | 2 | 3 | - | 3 | - | - |
| ADC | - | - | 7 | - | - | - | - |
| I2C | 3 | 2 | 3 | - | 2 | 1 | 1 |
| SPI | 3 | 2 | 2 | - | 2 | - | - |
| UART | 4 | 2 | 6 | - | 3 | 4 | 2 |
| CAN | - | - | 2 | - | - | - | - |
| Pin header | - |
HAT (Raspberry Pi) |
- | - | - | - | - |
| Form factor | - | Raspberry Pi Compute Module 3 | - | - | - | - | - |
| Dimensions | 28 mm x 38 mm x 4 mm | 69 mm x 31 mm x 4 mm | 52 mm x 42 mm x 3 mm | 178 mm x 80 mm x 15 mm | 64 mm x 60 mm x 14 mm | 152 mm x 152 mm x 20 mm | 153 mm x 153 mm |
| Temperature | -40.0°C - 85.0°C | -25.0°C - 80.0°C | -40.0°C - 85.0°C | - | - | 0.0°C - 40.0°C | - |
| Software |
Linux: True Android: yes |
Linux: True (mainline) Windows: 10 IoT core |
Linux: True Windows: CE 6.0 |
Linux: True Android: 4.2 |
Linux: True Android: 5.1 |
Linux: True (mainline) Windows: Windows (x86_64) |
Linux: True (mainline) Windows: Windows (x86_64) |