Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Digilent Pynq-Z1 vs. FS Elektronik Systeme efusMX8X vs. Wandboard Wandboard Dual vs. Sinovoip Banana Pi BP1-R1
Pynq-Z1 |
efusMX8X |
Wandboard Dual |
Banana Pi BP1-R1 |
|
| Manufacturer | Digilent | FS Elektronik Systeme | Wandboard | Sinovoip |
| Price | $ 199.0 | - | $ 99.0 | $ 69.0 |
| SoC | Xilinx ZYNQ XC7Z020 | NXP i.MX8 DualX/QuadXPlus | NXP i.MX6 Dual Lite | AllWinner A20 |
| CPU | 2× ARM Cortex-A9 @ 650 Mhz | 4× ARM Cortex-A35 @ 1.2 Ghz | 2× ARM Cortex-A9 @ 1.0 Ghz | 2× ARM Cortex-A7 @ 1.0 Ghz |
| GPU | - | 2D, 3D | Vivante GC 880 + Vivante GC 320 | Mali-400 MP2 |
| RAM | 1.0 GiB DDR3 | 2.0 GiB LPDDR4 | 1.0 GiB | 1.0 GiB DDR3 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
| Wi-Fi | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | - | onboard | onboard | - |
| Camera | - | up to 1 x inputs | up to 1 x inputs | - |
| Audio |
1 × outputs 1 × line-in |
1 × I2S |
1 × outputs 1 × line-in 1 × mic-in 1 × spdif-out |
1 × outputs 1 × mic-in |
| GPIO | 16 | - | 10 | 26 |
| ADC | - | 5 | - | 26 |
| I2C | 2 | 4 | 1 | - |
| SPI | 2 | 2 | 1 | - |
| UART | - | 4 | 1 | - |
| CAN | - | 2 | - | - |
| Pin header | Shield (Arduino) | - | - | - |
| Dimensions | 87 mm x 122 mm | 47 mm x 62 mm x 11 mm | 95 mm x 95 mm x 22 mm | - |
| Temperature | - | 0.0°C - 70.0°C | - | - |
| Software |
Linux: True Android: yes |
Linux: True |
Linux: True Android: 5.0 |
Linux: True Android: 4.2 |