Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
FriendlyElec NanoPi K1 Plus vs. Gateworks GW7300 vs. Arduino Arduino TRE
NanoPi K1 Plus |
GW7300 |
Arduino TRE |
|
| Manufacturer | FriendlyElec | Gateworks | Arduino |
| Price | $ 35.0 | - | - |
| SoC | AllWinner H5 | NXP i.MX8M Mini Quad | TI AM335x |
| CPU | 4× ARM Cortex-A53 @ 1.3 Ghz | 4× ARM Cortex-A53 @ 1.6 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz |
| GPU | Mali-450 MP | - | SGX530 |
| RAM | 2.0 GiB DDR3 | 4.0 GiB DDR4 | 1.0 GiB |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
3 × host ports 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps supports passive and active PoE
|
1× 10/100
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
| Bluetooth | - | onboard | - |
| Camera | up to 1 x inputs | up to 1 x inputs | - |
| Audio |
1 × outputs 1 × spdif-out |
1 × I2S |
1 × outputs 1 × line-in |
| GPIO | 40 | 1 | 12 |
| PWM | 1 | - | 1 |
| ADC | - | 1 | 1 |
| I2C | 1 | 1 | - |
| SPI | 1 | - | - |
| UART | 1 | 1 | - |
| Pin header |
HAT (Raspberry Pi) |
- | Shield (Arduino) |
| Dimensions | 85 mm x 56 mm x 19 mm | 105 mm x 100 mm x 2.1 mm | 115 mm x 105 mm x 25 mm |
| Temperature | - | -40.0°C - 85.0°C | - |
| Software | Linux: True | Linux: True | Linux: True |