Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
FriendlyElec NanoPi R1S-H3 vs. FriendlyElec NanoPi R1S-H5 vs. Xunlong Software Orange Pi Plus 2E vs. Intel Intel Galileo (Gen 2) vs. DFI AL551 vs. Nvidia Jetson Nano Developer Kit vs. Arduino Arduino TRE
NanoPi R1S-H3 |
NanoPi R1S-H5 |
Orange Pi Plus 2E |
Intel Galileo (Gen 2) |
AL551 |
Jetson Nano Developer Kit |
Arduino TRE |
|
| Manufacturer | FriendlyElec | FriendlyElec | Xunlong Software | Intel | DFI | Nvidia | Arduino |
| Price | $ 20.0 | $ 20.0 | $ 35.0 | $ 75.0 | - | $ 99.0 | - |
| SoC | Allwinner H3 | Allwinner H5 | AllWinner H3 | Intel Quark X1000 | Intel Atom E3900 (and other Apollo Lake options) | Nvidia Erista | TI AM335x |
| CPU | 4× ARM Cortex-A7 @ 1.3 Ghz | 4× ARM Cortex-A53 @ 1.3 Ghz | 4× ARM Cortex-A7 @ 1.6 Ghz | 1× Pentium (P54C/i586) @ 400 Mhz | 4× x86 @ 1.6 Ghz | 4× ARM Cortex-A57 MPCore @ 1.43 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz |
| GPU | Mali400 MP2 | Mali450 MP4 | Mali-400 MP2 | - | Intel HD Graphics 500 | Nvidia Maxwell with 128x CUDA cores | SGX530 |
| RAM | 1.0 GiB DDR3 | 1.0 GiB DDR3 | 2.0 GiB DDR3 | - | 8.0 GiB DDR3L | 4.0 GiB LPDDR4 | 1.0 GiB |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | - | 1 × soldered | 1 × soldered |
| USB | 1 × host port | 1 × host port |
3 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
6 × host ports 1 of which are Type-C 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 10/100 supports passive and active PoE
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 10/100
|
| Wi-Fi |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- | - | - | - |
| Camera | - | - | up to 1 x inputs | - | - | up to 1 x inputs | - |
| Audio | - | - | 1 × outputs | - |
1 × outputs 1 × mic-in |
1 × I2S |
1 × outputs 1 × line-in |
| GPIO | - | - | 40 | 14 | 8 | 40 | 12 |
| PWM | - | - | 1 | 6 | - | - | 1 |
| ADC | - | - | - | 6 | - | - | 1 |
| I2C | - | - | 1 | 1 | - | 1 | - |
| SPI | - | - | 1 | 1 | 1 | 1 | - |
| UART | - | - | 1 | 2 | - | 1 | - |
| Pin header | - | - |
HAT (Raspberry Pi) |
Shield (Arduino) | - | - | Shield (Arduino) |
| Dimensions | 55 mm x 52 mm | 55 mm x 52 mm | 108 mm x 67 mm x 15 mm | 124 mm x 72 mm x 17 mm | 146 mm x 102 mm x 25 mm | 100 mm x 80 mm x 29 mm | 115 mm x 105 mm x 25 mm |
| Temperature | -20.0°C - 70.0°C | -20.0°C - 70.0°C | - | - | 0.0°C - 60.0°C | - | - |
| Software | Linux: True | Linux: True |
Linux: True Android: 4.4 |
Linux: True Windows: 10 IoT Core |
Linux: True (mainline) Windows: 10 IoT Enterprise |
Linux: True | Linux: True |