Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Google Coral Dev Board vs. Raspberry Pi Foundation Raspberry Pi Pico vs. Ka-Ro TXA5 vs. Nvidia Jetson TX2 vs. MediaTek LinkIt Smart 7688 vs. Novasom M7
Coral Dev Board |
Raspberry Pi Pico |
TXA5 |
Jetson TX2 |
LinkIt Smart 7688 |
M7 |
|
| Manufacturer | Raspberry Pi Foundation | Ka-Ro | Nvidia | MediaTek | Novasom | |
| Price | $ 150.0 | $ 4.0 | $ 84.0 | $ 549.0 | $ 13.0 | - |
| SoC | NXP i.MX 8M | Raspberry Pi Foundation RP2040 | Atmel SAMA5D42 | Nvidia Tegra X2 | MediaTek MT7688AN | Rockchip RK3328 |
| CPU | 4× ARM Cortex-A53 @ 1.5 Ghz | 2× ARM Cortex-M0+ @ 133 Mhz | 1× ARM Cortex-A5 @ 530 Mhz |
4× ARM Cortex-A57 @ 2.0 Ghz 2× Nvidia Denver 2 @ 2.0 Ghz |
1× MIPS 24KEc @ 580 Mhz | 4× ARM Cortex-A53 @ 1.5 Ghz |
| GPU | Vivan GC7000 Lite | - | NEON supported | Nvidia Pascal (256 cores, 1300MHz) | - | Mali-450 MP4 |
| RAM | 1.0 GiB LPDDR4 | - | 8.0 GiB LPDDR4 | - | 2.0 GiB | |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which are Type-C 2 of which support USB-OTG |
1 × host port |
1 × host port 1 of which support USB-OTG |
2 × host ports | 1 × host port |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
1× 10/100
|
1× 10/100
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n |
On-board Wi-Fi without external antenna |
| Bluetooth | onboard | - | - | onboard | - | onboard |
| Camera | up to 1 x inputs | - | - | up to 1 x inputs | - | up to 1 x inputs |
| Audio |
1 × outputs 1 × mic-in |
- | 1 × outputs |
1 × I2S |
1 × outputs 1 × I2S |
1 × outputs 1 × I2S |
| GPIO | 40 | 26 | 103 | 400 | 22 | 22 |
| PWM | - | 16 | 1 | - | 4 | - |
| ADC | - | 3 | - | - | - | - |
| I2C | 1 | 2 | - | 1 | 1 | 2 |
| SPI | 1 | 2 | - | 1 | 2 | 1 |
| UART | 1 | 2 | - | 1 | 3 | 1 |
| Pin header | - | - | - | - | - |
HAT (Raspberry Pi) |
| Dimensions | 85 mm x 56 mm | 51 mm x 21 mm | 68 mm x 26 mm x 4 mm | 50 mm x 87 mm x 6 mm | 56 mm x 26 mm x 13 mm | 86 mm x 56 mm |
| Temperature | - | -20.0°C - 85.0°C | - | - | - | 0.0°C - 70.0°C |
| Software |
Linux: True Android: Things |
- | Linux: True | Linux: True | Linux: True |
Linux: True Android: 7.1, 8.1 |