Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Inforce Inforce 6560 vs. LinkSprite pcDuino3B vs. DFI FS051 vs. Next Thing Co. CHIP Pro
Inforce 6560 |
pcDuino3B |
FS051 |
CHIP Pro |
|
| Manufacturer | Inforce | LinkSprite | DFI | Next Thing Co. |
| Price | $ 220.0 | $ 59.0 | - | $ 16.0 |
| SoC | Qualcomm Snapdragon 660 (SDA660) | AllWinner A20 | NXP i.MX6 | AllWinner R8 (Next Thing GR8) |
| CPU | 8× Qualcomm Kryo 260 @ 2.2 Ghz | 2× ARM Cortex-A7 @ 1.0 Ghz | 4× ARM Cortex-A9 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz |
| GPU | Adreno 512 | Mali-400 | - | Mali-400 |
| RAM | 3.0 GiB LPDDR4 | 1.0 GiB DDR3 | 4.0 GiB DDR3L | - |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB | 2 × host ports |
1 × host port 1 of which support USB-OTG |
5 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | - | - | onboard |
| Camera | up to 2 x inputs | - | - | up to 1 x inputs |
| Audio |
1 × outputs 1 × mic-in |
1 × outputs | - |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
| GPIO | - | 14 | 8 | 32 |
| PWM | - | 1 | - | 2 |
| ADC | - | 1 | - | - |
| I2C | 1 | - | - | 1 |
| SPI | 1 | - | - | 1 |
| UART | 1 | - | - | 2 |
| Pin header | - | Shield (Arduino) | - | - |
| Form factor | Pico-ITX | - | Pico-ITX | - |
| Dimensions | 100 mm x 72 mm | - | 100 mm x 72 mm | 45 mm x 30 mm x 3 mm |
| Temperature | 0.0°C - 70.0°C | - | -20.0°C - 70.0°C | - |
| Software |
Linux: True Android: 8+ |
Linux: True Android: 4.2 |
Linux: True Android: 5.1 |
Linux: True |