Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
iWave Systems iW-Rainbow-G23S vs. FS Elektronik Systeme efusA9X vs. Raspberry Pi Foundation Raspberry Pi Zero W (Wireless) vs. Sinovoip Banana Pi R2 vs. FriendlyElec NanoPi K2 vs. Forlinx OK335xS SBC
iW-Rainbow-G23S |
efusA9X |
Raspberry Pi Zero W (Wireless) |
Banana Pi R2 |
NanoPi K2 |
OK335xS SBC |
|
| Manufacturer | iWave Systems | FS Elektronik Systeme | Raspberry Pi Foundation | Sinovoip | FriendlyElec | Forlinx |
| Price | - | - | $ 10.0 | $ 82.0 | $ 40.0 | - |
| SoC | Renesas RZ/G1C | NXP i.MX 6SoloX | Broadcom BCM2835 | MediaTek MT7623N | Amlogic S905 | TI Sitara AM3354 |
| CPU | 2× ARM Cortex-A7 @ 1.0 Ghz | 1× ARM Cortex-A9 @ 1.0 Ghz | 1× ARM1176JZF-S @ 1.0 Ghz | 4× ARM Cortex-A7 @ 1.3 Ghz | 4× ARM Cortex-A53 @ 1.5 Ghz | 1× ARM Cortex-A8 @ 800 Mhz |
| GPU | PowerVR SGX531 | 2D, 3D | VideoCore IV | Mali-450 MP4 | Mali-450 MP | - |
| RAM | 2.0 GiB | 2.0 GiB | 1.0 GiB DDR3 | 2.0 GiB | 2.0 GiB | 1.0 GiB DDR3 |
| eMMC | 1 × soldered | 1 × soldered | - | 1 × soldered | 1 × soldered | 1 × soldered |
| SD | - | - | 1 × bootable: True | - | - | - |
| USB |
2 × host ports 1 of which support USB-OTG |
1 × host port |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | - | onboard | onboard | onboard | onboard | onboard |
| Camera | up to 1 x inputs | up to 1 x inputs | up to 1 x inputs | up to 1 x inputs | - | - |
| Audio |
2 × I2S |
1 × I2S |
1 × outputs 1 × I2S |
1 × outputs 1 × I2S |
1 × spdif-out 1 × I2S |
1 × outputs 1 × line-in 1 × mic-in |
| GPIO | 100 | - | 40 | 28 | 40 | 20 |
| PWM | 2 | - | 2 | 1 | 1 | 2 |
| ADC | - | - | - | - | 1 | 5 |
| I2C | 3 | 2 | 1 | 1 | 1 | 1 |
| SPI | 1 | 2 | 1 | 1 | - | 1 |
| UART | 5 | 4 | 1 | 1 | 1 | 4 |
| CAN | 1 | - | - | - | - | 1 |
| Pin header |
HAT (Raspberry Pi) |
- |
HAT (Raspberry Pi) |
HAT (Raspberry Pi) |
- | - |
| Form factor | - | - | Raspberry Pi Zero | - | - | - |
| Dimensions | 85 mm x 56 mm x 21 mm | 47 mm x 62 mm x 11 mm | 65 mm x 30 mm x 5 mm | 148 mm x 100 mm x 18 mm | 85 mm x 56 mm x 14 mm | 130 mm x 190 mm |
| Temperature | -20.0°C - 85.0°C | 0.0°C - 70.0°C | 0.0°C - 50.0°C | - | - | -40.0°C - 85.0°C |
| Software | Linux: True |
Linux: True Android: 5.1 Windows: WEC 2013 |
Linux: True (mainline) |
Linux: True Android: 5.1 |
Linux: True Android: 5.1 |
Linux: True Android: 4.2 Windows: CE 6.0, CE 7.0 |