Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Kobol Innovations Helios64 vs. Raspberry Pi Foundation Raspberry Pi 5 vs. FriendlyElec NanoPi Fire3 vs. Geniatech XPI-S905X vs. MediaTek LinkIt Smart 7688 vs. Onion Omega2 Pro
Helios64 |
Raspberry Pi 5 |
NanoPi Fire3 |
XPI-S905X |
LinkIt Smart 7688 |
Omega2 Pro |
|
| Manufacturer | Kobol Innovations | Raspberry Pi Foundation | FriendlyElec | Geniatech | MediaTek | Onion |
| Price | $ 189.0 | $ 60.0 | $ 35.0 | $ 35.0 | $ 13.0 | $ 49.0 |
| SoC | Rockchip RK3399 | Broadcom BCM2712 | Samsung S5P6818 | Amlogic S905X | MediaTek MT7688AN | Onion Omega2+ |
| CPU |
2× ARM Cortex-A72 @ 2.0 Ghz 4× ARM Cortex-A53 @ 1.5 Ghz |
4× ARM Cortex-A76 @ 2.4 Ghz | 8× ARM Cortex-A53 @ 1.4 Ghz | 4× ARM Cortex-A53 @ 1.5 Ghz | 1× MIPS 24KEc @ 580 Mhz | 1× MIPS @ 580 Mhz |
| GPU | Mali-T860 MP4 | VideoCore VII | Mali-400 MP | Mali 450 | - | - |
| Onboard MCU | - | 1 x Raspberry Pi RP1 | - | - | - | - |
| RAM | 4.0 GiB LPDDR4 | 8.0 GiB LPDDR4 @ 4267MHz | 1.0 GiB DDR3 | 4.0 GiB | - | |
| eMMC | 1 × soldered | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| SD | - | 1 × bootable: True | - | - | - | - |
| USB |
3 × host ports 1 of which support USB-OTG |
5 × host ports 1 × device port 1 of which are Type-C |
1 × host port 1 of which support USB-OTG |
4 × host ports | 1 × host port | 1 × host port |
| Ethernet |
1× 2.5 Gbps wake on lan supported
|
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps
|
1× 10/100
|
1× 10/100
|
1× 10/100
|
| Wi-Fi | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n/ax 5Ghz a/n/ac/ax |
- | On-board Wi-Fi without external antenna |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | - | onboard | - | onboard | - | - |
| Camera | - | up to 2 x inputs | up to 1 x inputs | - | - | - |
| Audio | - |
1 × outputs 1 × I2S |
- |
2 × spdif-out 8 × I2S |
1 × outputs 1 × I2S |
1 × I2S |
| GPIO | 16 | 26 | 40 | 40 | 22 | 8 |
| PWM | 2 | 4 | 3 | 3 | 4 | 2 |
| I2C | 2 | 2 | 2 | 4 | 1 | 1 |
| SPI | 1 | 2 | 1 | - | 2 | 1 |
| UART | 2 | 1 | 3 | 1 | 3 | 2 |
| Pin header | - |
HAT (Raspberry Pi) |
HAT (Raspberry Pi) |
HAT (Raspberry Pi) |
- | - |
| Form factor | - | Raspberry Pi | - | - | - | - |
| Dimensions | 120 mm x 120 mm | 85 mm x 56 mm x 20 mm | 75 mm x 40 mm x 16 mm | 85 mm x 56 mm x 1.6 mm | 56 mm x 26 mm x 13 mm | 73 mm x 44 mm |
| Temperature | 0.0°C - 80.0°C | 0.0°C - 50.0°C | -20.0°C - 80.0°C | -5.0°C - 30.0°C | - | - |
| Software | Linux: True | Linux: True (mainline) |
Linux: True Android: 5.1 |
Linux: True Android: 7.1 |
Linux: True | Linux: True |