Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
LeMaker Banana Pi vs. Axiomtek PICO317 vs. Litemax AECX-WHL0 vs. LinkSprite pcDuino2 vs. Keith and Koep Trizeps VIII mini vs. Xunlong Software Orange Pi Zero
Banana Pi |
PICO317 |
AECX-WHL0 |
pcDuino2 |
Trizeps VIII mini |
Orange Pi Zero |
|
| Manufacturer | LeMaker | Axiomtek | Litemax | LinkSprite | Keith and Koep | Xunlong Software |
| Price | $ 57.0 | - | - | $ 59.0 | - | $ 9.0 |
| SoC | AllWinner A20 | Intel Atom x5-E3940 | Intel Whiskey Lake-U | AllWinner A10 | NXP i.MX 8M Mini | AllWinner H2+ |
| CPU | 2× ARM Cortex-A7 @ 1.0 Ghz | 4× x86 @ 1.6 Ghz | 4× Intel 8th Gen. Core @ 4.4 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A7 @ 1.2 Ghz |
| GPU | Mali-400 MP2 | Intel HD Graphics 500 | Gen. 9.5 UHD 620 | OpenGL ES2.0, OpenVG 1.1 Mali 400 core | - | Mali-400 MP2 @600MHz |
| RAM | 1.0 GiB DDR3 | 64.0 GiB DDR4 | 1.0 GiB DDR3 | 4.0 GiB LPDDR4 | - | |
| eMMC | 1 × soldered | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
2 × host ports 1 of which support USB-OTG |
5 × host ports 1 of which are Type-C |
6 × host ports |
1 × host port 1 of which support USB-OTG |
- |
3 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps wake on lan supported
|
1× 10/100
|
1× 1 Gbps
|
1× 10/100 supports passive and active PoE
|
| Wi-Fi | - | - | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
| Bluetooth | - | - | - | - | onboard | - |
| Camera | - | - | - | - | up to 1 x inputs | - |
| Audio | 1 × outputs |
1 × outputs 1 × line-in |
1 × outputs 1 × line-in 1 × mic-in |
- |
2 × outputs 2 × line-in 1 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 1 × mic-in 1 × spdif-out |
| GPIO | 26 | - | 8 | 12 | 1 | 26 |
| PWM | - | - | - | 1 | 1 | 1 |
| ADC | - | - | - | 1 | 1 | - |
| I2C | - | - | 1 | - | 2 | 2 |
| SPI | - | - | - | - | 1 | 1 |
| UART | - | 2 | - | - | 4 | 1 |
| Pin header | - | - | - | Shield (Arduino) | - |
HAT (Raspberry Pi) |
| Form factor | - | Pico-ITX | - | - | - | - |
| Dimensions | - | 100 mm x 72 mm | 146 mm x 102 mm | - | 68 mm x 37 mm x 7 mm | 48 mm x 46 mm x 17 mm |
| Temperature | - | -40.0°C - 70.0°C | 0.0°C - 60.0°C | - | -25.0°C - 85.0°C | - |
| Software |
Linux: True Android: 4.2 |
Linux: True (mainline) Windows: Windows (x86_64) |
Linux: True (mainline) Windows: 10 |
Linux: True Android: 4.2 |
Linux: True Android: 9 Windows: 10 IoT Core |
Linux: True Android: Android |