Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
LeMaker Banana Pi vs. Axiomtek PICO317 vs. SolidRun i.MX8M Plus SoM vs. Sinovoip Banana Pi BPI-M2 Ultra vs. LinkSprite pcDuino2 vs. Sinovoip Banana Pi BPI-W3
Banana Pi |
PICO317 |
i.MX8M Plus SoM |
Banana Pi BPI-M2 Ultra |
pcDuino2 |
Banana Pi BPI-W3 |
|
| Manufacturer | LeMaker | Axiomtek | SolidRun | Sinovoip | LinkSprite | Sinovoip |
| Price | $ 57.0 | - | - | $ 40.0 | $ 59.0 | - |
| SoC | AllWinner A20 | Intel Atom x5-E3940 | NXP i.MX8M Plus Dual/Quad | AllWinner R40 | AllWinner A10 | Rockchip RK3588 |
| CPU | 2× ARM Cortex-A7 @ 1.0 Ghz | 4× x86 @ 1.6 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A7 @ 1.5 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz |
4× ARM Cortex-A76 @ 2.4 Ghz 4× ARM Cortex-A55 @ 1.8 Ghz |
| GPU | Mali-400 MP2 | Intel HD Graphics 500 | Vivante GC7000UL | Mali-400 MP2 | OpenGL ES2.0, OpenVG 1.1 Mali 400 core | Mali G610 MP4 |
| RAM | 1.0 GiB DDR3 | 8.0 GiB LPDDR4 | 2.0 GiB DDR3 | 1.0 GiB DDR3 | 8.0 GiB LPDDR4 | |
| eMMC | 1 × soldered | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered 32.0 GiB |
| SATA | - | - | - | - | - | 1 × SATA 3 |
| USB |
2 × host ports 1 of which support USB-OTG |
5 × host ports 1 of which are Type-C |
2 × host ports |
3 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
5 × host ports 1 × device port 1 of which are Type-C |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 10/100
|
2× 1 Gbps
|
| Wi-Fi | - | - | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
| Bluetooth | - | - | - | onboard | - | - |
| Camera | - | - | up to 3 x inputs | up to 1 x inputs | - | - |
| Audio | 1 × outputs |
1 × outputs 1 × line-in |
1 × spdif-out 18 × I2S |
1 × outputs 1 × mic-in |
- | - |
| GPIO | 26 | - | 75 | 40 | 12 | 28 |
| PWM | - | - | - | - | 1 | - |
| ADC | - | - | - | - | 1 | - |
| I2C | - | - | - | 1 | - | - |
| SPI | - | - | 1 | 1 | - | - |
| UART | - | 2 | 3 | 1 | - | - |
| CAN | - | - | 2 | - | - | - |
| Pin header | - | - | - |
HAT (Raspberry Pi) |
Shield (Arduino) | - |
| Form factor | - | Pico-ITX | - | - | - | - |
| Dimensions | - | 100 mm x 72 mm | 47 mm x 30 mm | 92 mm x 60 mm x 13 mm | - | 148 mm x 101 mm |
| Temperature | - | -40.0°C - 70.0°C | -40.0°C - 85.0°C | - | - | 0.0°C - 80.0°C |
| Software |
Linux: True Android: 4.2 |
Linux: True (mainline) Windows: Windows (x86_64) |
Linux: True Android: Android |
Linux: True Android: supported |
Linux: True Android: 4.2 |
Linux: True |