Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
LeMaker Banana Pi vs. Axiomtek PICO317 vs. SolidRun i.MX8M Plus SoM vs. Sinovoip Banana Pi BPI-M2 Ultra vs. LinkSprite pcDuino2 vs. Xunlong Software Orange Pi Zero
Banana Pi |
PICO317 |
i.MX8M Plus SoM |
Banana Pi BPI-M2 Ultra |
pcDuino2 |
Orange Pi Zero |
|
| Manufacturer | LeMaker | Axiomtek | SolidRun | Sinovoip | LinkSprite | Xunlong Software |
| Price | $ 57.0 | - | - | $ 40.0 | $ 59.0 | $ 9.0 |
| SoC | AllWinner A20 | Intel Atom x5-E3940 | NXP i.MX8M Plus Dual/Quad | AllWinner R40 | AllWinner A10 | AllWinner H2+ |
| CPU | 2× ARM Cortex-A7 @ 1.0 Ghz | 4× x86 @ 1.6 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A7 @ 1.5 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A7 @ 1.2 Ghz |
| GPU | Mali-400 MP2 | Intel HD Graphics 500 | Vivante GC7000UL | Mali-400 MP2 | OpenGL ES2.0, OpenVG 1.1 Mali 400 core | Mali-400 MP2 @600MHz |
| RAM | 1.0 GiB DDR3 | 8.0 GiB LPDDR4 | 2.0 GiB DDR3 | 1.0 GiB DDR3 | - | |
| eMMC | 1 × soldered | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
2 × host ports 1 of which support USB-OTG |
5 × host ports 1 of which are Type-C |
2 × host ports |
3 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
3 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 10/100
|
1× 10/100 supports passive and active PoE
|
| Wi-Fi | - | - | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
| Bluetooth | - | - | - | onboard | - | - |
| Camera | - | - | up to 3 x inputs | up to 1 x inputs | - | - |
| Audio | 1 × outputs |
1 × outputs 1 × line-in |
1 × spdif-out 18 × I2S |
1 × outputs 1 × mic-in |
- |
1 × outputs 1 × mic-in 1 × spdif-out |
| GPIO | 26 | - | 75 | 40 | 12 | 26 |
| PWM | - | - | - | - | 1 | 1 |
| ADC | - | - | - | - | 1 | - |
| I2C | - | - | - | 1 | - | 2 |
| SPI | - | - | 1 | 1 | - | 1 |
| UART | - | 2 | 3 | 1 | - | 1 |
| CAN | - | - | 2 | - | - | - |
| Pin header | - | - | - |
HAT (Raspberry Pi) |
Shield (Arduino) |
HAT (Raspberry Pi) |
| Form factor | - | Pico-ITX | - | - | - | - |
| Dimensions | - | 100 mm x 72 mm | 47 mm x 30 mm | 92 mm x 60 mm x 13 mm | - | 48 mm x 46 mm x 17 mm |
| Temperature | - | -40.0°C - 70.0°C | -40.0°C - 85.0°C | - | - | - |
| Software |
Linux: True Android: 4.2 |
Linux: True (mainline) Windows: Windows (x86_64) |
Linux: True Android: Android |
Linux: True Android: supported |
Linux: True Android: 4.2 |
Linux: True Android: Android |