Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
LeMaker Banana Pi vs. SolidRun i.MX8M Plus SoM vs. LinkSprite pcDuino2 vs. Keith and Koep Trizeps VIII mini vs. Xunlong Software Orange Pi Zero vs. Raspberry Pi Foundation Raspberry Pi Compute Module 4
Banana Pi |
i.MX8M Plus SoM |
pcDuino2 |
Trizeps VIII mini |
Orange Pi Zero |
Raspberry Pi Compute Module 4 |
|
| Manufacturer | LeMaker | SolidRun | LinkSprite | Keith and Koep | Xunlong Software | Raspberry Pi Foundation |
| Price | $ 57.0 | - | $ 59.0 | - | $ 9.0 | $ 25.0 |
| SoC | AllWinner A20 | NXP i.MX8M Plus Dual/Quad | AllWinner A10 | NXP i.MX 8M Mini | AllWinner H2+ | Broadcom BCM2711 |
| CPU | 2× ARM Cortex-A7 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A7 @ 1.2 Ghz | 4× ARM Cortex-A72 @ 1.5 Ghz |
| GPU | Mali-400 MP2 | Vivante GC7000UL | OpenGL ES2.0, OpenVG 1.1 Mali 400 core | - | Mali-400 MP2 @600MHz | VideoCore VI |
| RAM | 1.0 GiB DDR3 | 8.0 GiB LPDDR4 | 1.0 GiB DDR3 | 4.0 GiB LPDDR4 | - | 8.0 GiB LPDDR4 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
2 × host ports 1 of which support USB-OTG |
2 × host ports |
1 × host port 1 of which support USB-OTG |
- |
3 × host ports 1 of which support USB-OTG |
1 × host port |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
1× 10/100 supports passive and active PoE
|
1× 1 Gbps
|
| Wi-Fi | - | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
| Bluetooth | - | - | - | onboard | - | onboard |
| Camera | - | up to 3 x inputs | - | up to 1 x inputs | - | up to 2 x inputs |
| Audio | 1 × outputs |
1 × spdif-out 18 × I2S |
- |
2 × outputs 2 × line-in 1 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 1 × mic-in 1 × spdif-out |
- |
| GPIO | 26 | 75 | 12 | 1 | 26 | 28 |
| PWM | - | - | 1 | 1 | 1 | - |
| ADC | - | - | 1 | 1 | - | - |
| I2C | - | - | - | 2 | 2 | 6 |
| SPI | - | 1 | - | 1 | 1 | 5 |
| UART | - | 3 | - | 4 | 1 | 6 |
| CAN | - | 2 | - | - | - | - |
| Pin header | - | - | Shield (Arduino) | - |
HAT (Raspberry Pi) |
- |
| Form factor | - | - | - | - | - | Raspberry Pi Compute Module 4 |
| Dimensions | - | 47 mm x 30 mm | - | 68 mm x 37 mm x 7 mm | 48 mm x 46 mm x 17 mm | 55 mm x 40 mm |
| Temperature | - | -40.0°C - 85.0°C | - | -25.0°C - 85.0°C | - | 0.0°C - 80.0°C |
| Software |
Linux: True Android: 4.2 |
Linux: True Android: Android |
Linux: True Android: 4.2 |
Linux: True Android: 9 Windows: 10 IoT Core |
Linux: True Android: Android |
Linux: True (mainline) |