Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Libre Computer Renegade Elite vs. Gateworks GW5910 vs. Beijing Widora Technology Co., Ltd. MQ-Quad vs. Embedded Now Piconium vs. Raspberry Pi Foundation Raspberry Pi Zero
|
Renegade Elite |
GW5910 |
MQ-Quad |
Piconium |
Raspberry Pi Zero |
|
| Manufacturer | Libre Computer | Gateworks | Beijing Widora Technology Co., Ltd. | Embedded Now | Raspberry Pi Foundation |
| Price | $ 99.0 | - | $ 25.0 | $ 449.0 | $ 5.0 |
| SoC | Rockchip RK3399 | NXP i.MX6 | Allwinner H616 | Intel Atom E3845 | Broadcom BCM2835 |
| CPU |
2× ARM Cortex-A72 @ 2.0 Ghz 4× ARM Cortex-A53 @ 1.5 Ghz |
2× ARM Cortex-A9 @ 800 Mhz | 4× ARM Cortex-A53 @ 1.5 Ghz | 4× Intel Bay Trail @ 1.91 Ghz | 1× ARM1176JZF-S @ 1.0 Ghz |
| GPU | Mali-T860 MP4 | - | Mali G31 MP2 | Intel HD Graphics | VideoCore IV |
| RAM | 4.0 GiB LPDDR4 | 1.0 GiB DDR3 | 1.0 GiB DDR3L | 2.0 GiB DDR3L with ECC | 1.0 GiB DDR3 |
| SPI flash | 16.0 MiB, bootable | - | - | - | - |
| eMMC | 1 × soldered | 1 × soldered | - | 1 × soldered | - |
| SD | - | - | 1 × bootable: True | - | 1 × bootable: True |
| USB |
3 × host ports 1 of which are Type-C 2 of which support USB-OTG |
1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
9 × host ports |
1 × host port 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps supports passive and active PoE
|
1× 10/100
|
1× 1 Gbps
|
|
| Wi-Fi | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
| Bluetooth | - | onboard | onboard | - | - |
| Camera | up to 1 x inputs | - | - | - | up to 1 x inputs |
| Audio | - | - |
1 × outputs 2 × I2S |
- |
1 × outputs 1 × I2S |
| GPIO | 60 | 4 | 25 | - | 40 |
| PWM | - | - | 4 | - | 2 |
| I2C | - | - | 1 | 1 | 1 |
| SPI | - | 1 | 1 | 1 | 1 |
| UART | 1 | 2 | 2 | - | 1 |
| Pin header | - | - |
HAT (Raspberry Pi) |
- |
HAT (Raspberry Pi) |
| Form factor | - | - | Raspberry Pi Zero | - | Raspberry Pi Zero |
| Dimensions | 120 mm x 72 mm x 12 mm | 100 mm x 70 mm x 21 mm | 65 mm x 30 mm | 55 mm x 130 mm x 27 mm | 65 mm x 30 mm x 5 mm |
| Temperature | - | -40.0°C - 85.0°C | - | -40.0°C - 85.0°C | 0.0°C - 50.0°C |
| Software |
Linux: True Android: 8.1 |
Linux: True |
Linux: True Android: 10 |
Linux: True (mainline) Windows: yes |
Linux: True (mainline) |