Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Libre Computer Renegade Elite vs. Gateworks GW5910 vs. MYIR Tech Z-turn board vs. MYIR Tech MYC-C8MMX vs. Embedded Now Piconium vs. Raspberry Pi Foundation Raspberry Pi Zero
Renegade Elite |
GW5910 |
Z-turn board |
MYC-C8MMX |
Piconium |
Raspberry Pi Zero |
|
| Manufacturer | Libre Computer | Gateworks | MYIR Tech | MYIR Tech | Embedded Now | Raspberry Pi Foundation |
| Price | $ 99.0 | - | $ 99.0 | $ 79.0 | $ 449.0 | $ 5.0 |
| SoC | Rockchip RK3399 | NXP i.MX6 | Xilinx XC7Z010/020 | NXP i.MX 8M Mini | Intel Atom E3845 | Broadcom BCM2835 |
| CPU |
2× ARM Cortex-A72 @ 2.0 Ghz 4× ARM Cortex-A53 @ 1.5 Ghz |
2× ARM Cortex-A9 @ 800 Mhz | 2× ARM Cortex-A9 @ 670 Mhz | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× Intel Bay Trail @ 1.91 Ghz | 1× ARM1176JZF-S @ 1.0 Ghz |
| GPU | Mali-T860 MP4 | - | Xilinx | GC NanoUltra (3D); GC320 (2D) | Intel HD Graphics | VideoCore IV |
| RAM | 4.0 GiB LPDDR4 | 1.0 GiB DDR3 | 1.0 GiB | 4.0 GiB DDR4 | 2.0 GiB DDR3L with ECC | 1.0 GiB DDR3 |
| SPI flash | 16.0 MiB, bootable | - | - | - | - | - |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | - |
| SD | - | - | - | - | - | 1 × bootable: True |
| USB |
3 × host ports 1 of which are Type-C 2 of which support USB-OTG |
1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
2 × host ports 2 of which support USB-OTG |
9 × host ports |
1 × host port 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
| Bluetooth | - | onboard | - | - | - | - |
| Camera | up to 1 x inputs | - | - | up to 1 x inputs | - | up to 1 x inputs |
| Audio | - | - |
1 × outputs 1 × line-in |
1 × outputs 1 × line-in 1 × spdif-out 5 × I2S |
- |
1 × outputs 1 × I2S |
| GPIO | 60 | 4 | 9 | 100 | - | 40 |
| PWM | - | - | - | 4 | - | 2 |
| ADC | - | - | 9 | - | - | - |
| I2C | - | - | 1 | 4 | 1 | 1 |
| SPI | - | 1 | - | 3 | 1 | 1 |
| UART | 1 | 2 | 1 | 4 | - | 1 |
| Pin header | - | - | - | - | - |
HAT (Raspberry Pi) |
| Form factor | - | - | - | - | - | Raspberry Pi Zero |
| Dimensions | 120 mm x 72 mm x 12 mm | 100 mm x 70 mm x 21 mm | 102 mm x 63 mm x 5 mm | 60 mm x 49 mm | 55 mm x 130 mm x 27 mm | 65 mm x 30 mm x 5 mm |
| Temperature | - | -40.0°C - 85.0°C | 0.0°C - 70.0°C | 0.0°C - 70.0°C | -40.0°C - 85.0°C | 0.0°C - 50.0°C |
| Software |
Linux: True Android: 8.1 |
Linux: True | Linux: True |
Linux: True Android: 9 |
Linux: True (mainline) Windows: yes |
Linux: True (mainline) |