Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Libre Computer Renegade Elite vs. Hardkernel ODROID-C4 vs. Beijing Widora Technology Co., Ltd. MQ-Quad vs. FS Elektronik Systeme PicoCoreRT1 vs. Raspberry Pi Foundation Raspberry Pi Zero
Renegade Elite |
ODROID-C4 |
MQ-Quad |
PicoCoreRT1 |
Raspberry Pi Zero |
|
| Manufacturer | Libre Computer | Hardkernel | Beijing Widora Technology Co., Ltd. | FS Elektronik Systeme | Raspberry Pi Foundation |
| Price | $ 99.0 | $ 50.0 | $ 25.0 | $ 440.0 | $ 5.0 |
| SoC | Rockchip RK3399 | Amlogic S905X3 | Allwinner H616 | NXP i.MX RT1050 | Broadcom BCM2835 |
| CPU |
2× ARM Cortex-A72 @ 2.0 Ghz 4× ARM Cortex-A53 @ 1.5 Ghz |
4× ARM Cortex-A55 @ 2.0 Ghz | 4× ARM Cortex-A53 @ 1.5 Ghz | 1× ARM Cortex-M7 @ 600 Mhz | 1× ARM1176JZF-S @ 1.0 Ghz |
| GPU | Mali-T860 MP4 | Mali G31 MP2 | Mali G31 MP2 | 2D | VideoCore IV |
| RAM | 4.0 GiB LPDDR4 | 4.0 GiB DDR4 | 1.0 GiB DDR3L | 256.0 GiB DDR3L | 1.0 GiB DDR3 |
| SPI flash | 16.0 MiB, bootable | - | - | - | - |
| eMMC | 1 × soldered | 1 × soldered | - | 1 × soldered | - |
| SD | - | - | 1 × bootable: True | - | 1 × bootable: True |
| USB |
3 × host ports 1 of which are Type-C 2 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps
|
1× 10/100
|
||
| Wi-Fi | - | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
- | - |
| Bluetooth | - | - | onboard | - | - |
| Camera | up to 1 x inputs | - | - | - | up to 1 x inputs |
| Audio | - |
1 × spdif-out 1 × I2S |
1 × outputs 2 × I2S |
1 × outputs 1 × line-in 1 × mic-in 1 × I2S |
1 × outputs 1 × I2S |
| GPIO | 60 | 25 | 25 | 50 | 40 |
| PWM | - | 6 | 4 | 1 | 2 |
| ADC | - | 2 | - | 1 | - |
| I2C | - | 2 | 1 | 4 | 1 |
| SPI | - | 1 | 1 | 2 | 1 |
| UART | 1 | 1 | 2 | 2 | 1 |
| CAN | - | - | - | 2 | - |
| Pin header | - | - |
HAT (Raspberry Pi) |
- |
HAT (Raspberry Pi) |
| Form factor | - | - | Raspberry Pi Zero | - | Raspberry Pi Zero |
| Dimensions | 120 mm x 72 mm x 12 mm | 85 mm x 56 mm x 20 mm | 65 mm x 30 mm | 40 mm x 35 mm | 65 mm x 30 mm x 5 mm |
| Temperature | - | 0.0°C - 75.0°C | - | 0.0°C - 70.0°C | 0.0°C - 50.0°C |
| Software |
Linux: True Android: 8.1 |
Linux: True Android: 9, 10 |
Linux: True Android: 10 |
Linux: True | Linux: True (mainline) |