Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
MinnowBoard MinnowBoard MAX vs. Raspberry Pi Foundation Raspberry Pi Compute Module 3 vs. Radxa Rock Lite vs. Sinovoip Banana Pi M2M Magic vs. Nvidia Jetson TX2 NX vs. Arduino Arduino TRE vs. DFI BW551
MinnowBoard MAX |
Raspberry Pi Compute Module 3 |
Rock Lite |
Banana Pi M2M Magic |
Jetson TX2 NX |
Arduino TRE |
BW551 |
|
| Manufacturer | MinnowBoard | Raspberry Pi Foundation | Radxa | Sinovoip | Nvidia | Arduino | DFI |
| Price | $ 99.0 | $ 30.0 | $ 39.0 | $ 23.0 | $ 199.0 | - | - |
| SoC | Intel E3815 | Broadcom BCM2837 | Rockchip RK3188 | AllWinner R16 / A33 | Nvidia Tegra X2 | TI AM335x | Intel Pentium/Celeron Processor N3000 Family |
| CPU | 1× Intel Atom @ 1.46 Ghz | 4× ARM Cortex-A53 @ 1.2 Ghz | 4× ARM Cortex-A9 @ 1.6 Ghz | 4× ARM Cortex-A7 @ 1.2 Ghz | 6× Nvidia Denver 2 + ARM Cortex-A57 MPCore @ 2.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× x86 @ 1.6 Ghz |
| GPU | Intel HD Graphics | VideoCore IV | Mali-400 MP4 | Mali-400 MP2 | Nvidia Pascal GPU (256x CUDA cores @1.3GHz) | SGX530 | - |
| RAM | 1.0 GiB | 1.0 GiB DDR3 | 1.0 GiB | 1.0 GiB DDR3 | 4.0 GiB LPDDR4 | 1.0 GiB | 8.0 GiB DDR3L |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | - |
| USB | 2 × host ports |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
4 × host ports |
4 × host ports 1 of which support USB-OTG |
6 × host ports |
| Ethernet |
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
||
| Wi-Fi | - | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- | - | - |
| Bluetooth | - | - | - | onboard | - | - | - |
| Camera | - | up to 2 x inputs | up to 1 x inputs | up to 1 x inputs | up to 5 x inputs | - | - |
| Audio | - | - |
1 × outputs 1 × spdif-out |
1 × I2S |
- |
1 × outputs 1 × line-in |
1 × outputs 1 × mic-in |
| GPIO | 8 | 48 | 80 | 40 | - | 12 | 8 |
| PWM | 1 | 2 | 4 | 1 | - | 1 | - |
| ADC | - | - | 2 | - | - | 1 | - |
| I2C | - | 2 | 1 | 1 | 4 | - | - |
| SPI | - | 2 | 2 | 1 | 2 | - | 1 |
| UART | - | 2 | 2 | 2 | 3 | - | - |
| CAN | - | - | - | - | 1 | - | - |
| Pin header | - |
HAT (Raspberry Pi) |
- | - | - | Shield (Arduino) | - |
| Form factor | - | Raspberry Pi Compute Module 3 | - | - | - | - | - |
| Dimensions | - | 69 mm x 31 mm x 4 mm | 100 mm x 80 mm x 12 mm | 51 mm x 51 mm x 11 mm | 70 mm x 45 mm | 115 mm x 105 mm x 25 mm | 146 mm x 102 mm |
| Temperature | - | -25.0°C - 80.0°C | - | - | - | - | 0.0°C - 60.0°C |
| Software |
Linux: True (mainline) Windows: Windows (x86_64) |
Linux: True (mainline) Windows: 10 IoT core |
Linux: True Android: 4.4 |
Linux: True | Linux: True | Linux: True |
Linux: True (mainline) Windows: 7, WES7, 8.1, 10 IoT Enterprise |