Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
MYIR Tech MYD-YA157C Development Board vs. MediaTek LinkIt Smart 7688 vs. Sinovoip Banana Pi M2M Magic vs. Radxa Rock Lite vs. Aaeon UP Xtreme Lite vs. SolidRun HummingBoard Gate vs. Mistral AM65x Industrial SoM vs. SECO UDOO X86 (original version)
MYD-YA157C Development Board |
LinkIt Smart 7688 |
Banana Pi M2M Magic |
Rock Lite |
UP Xtreme Lite |
HummingBoard Gate |
AM65x Industrial SoM |
UDOO X86 (original version) |
|
| Manufacturer | MYIR Tech | MediaTek | Sinovoip | Radxa | Aaeon | SolidRun | Mistral | SECO |
| Price | $ 65.0 | $ 13.0 | $ 23.0 | $ 39.0 | - | $ 96.0 | $ 245.0 | $ 174.0 |
| SoC | STMicroelectronics STM32MP157A | MediaTek MT7688AN | AllWinner R16 / A33 | Rockchip RK3188 | Intel Core i7-8265U | NXP i.MX6 Solo/DualLite/Dual/Quad | TI AM6548 | Intel N3160 |
| CPU | 2× ARM Cortex-A7 @ 650 Mhz | 1× MIPS 24KEc @ 580 Mhz | 4× ARM Cortex-A7 @ 1.2 Ghz | 4× ARM Cortex-A9 @ 1.6 Ghz | 4× Intel Whiskey Lake @ 1.8 Ghz | 4× ARM Cortex-A9 @ 1.2 Ghz | 4× ARM Cortex-A53 @ 1.1 Ghz | 4× Braswell x86 @ 2.24 Ghz |
| GPU | 3D | - | Mali-400 MP2 | Mali-400 MP4 | Intel Gen 9 Graphics | Vivante GC880/GC2000 | PowerVR SGX544-MP1 (3D) | Intel HD Graphics 400 |
| RAM | 1.0 GiB DDR3 | - | 1.0 GiB DDR3 | 1.0 GiB | 4.0 GiB DDR4 with ECC | 8.0 GiB DDR3L | ||
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which support USB-OTG |
1 × host port |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
5 × host ports | 4 × host ports | 2 × host ports | 3 × host ports |
| Ethernet |
1× 1 Gbps
|
1× 10/100
|
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
|
| Wi-Fi |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna | - | On-board Wi-Fi without external antenna |
| Bluetooth | onboard | - | onboard | - | onboard | onboard | - | onboard |
| Camera | up to 1 x inputs | - | up to 1 x inputs | up to 1 x inputs | - | up to 1 x inputs | up to 2 x inputs | - |
| Audio | - |
1 × outputs 1 × I2S |
1 × I2S |
1 × outputs 1 × spdif-out |
1 × outputs 1 × mic-in |
1 × outputs 1 × mic-in 1 × spdif-out |
4 × I2S |
1 × outputs 1 × mic-in 1 × spdif-out |
| GPIO | 20 | 22 | 40 | 80 | 40 | 36 | - | 14 |
| PWM | - | 4 | 1 | 4 | - | - | 6 | 4 |
| ADC | - | - | - | 2 | - | - | 2 | 6 |
| I2C | - | 1 | 1 | 1 | - | 1 | 4 | 2 |
| SPI | - | 2 | 1 | 2 | - | - | 2 | 1 |
| UART | 3 | 3 | 2 | 2 | 3 | 1 | 5 | 2 |
| CAN | 1 | - | - | - | - | - | 2 | - |
| Pin header | - | - | - | - | - | - | - | Shield (Arduino) |
| Dimensions | 110 mm x 80 mm | 56 mm x 26 mm x 13 mm | 51 mm x 51 mm x 11 mm | 100 mm x 80 mm x 12 mm | 122 mm x 129 mm x 22 mm | 102 mm x 69 mm x 20 mm | 90 mm x 63 mm | 120 mm x 85 mm |
| Temperature | 0.0°C - 70.0°C | - | - | - | 0.0°C - 60.0°C | 0.0°C - 40.0°C | -40.0°C - 85.0°C | - |
| Software | Linux: True | Linux: True | Linux: True |
Linux: True Android: 4.4 |
Linux: True (mainline) Windows: Windows (x86_64) |
Linux: True |
Linux: True Android: 9 |
Linux: True (mainline) Android: supported Windows: 10, 8.1, 7 |