Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
NetCube Systems Austria Kumquat vs. Avnet MaaXBoard vs. FriendlyElec NanoPi NEO AIR vs. emtrion emCON-MX8M Mini vs. Xunlong Software Orange Pi One Plus
Kumquat |
MaaXBoard |
NanoPi NEO AIR |
emCON-MX8M Mini |
Orange Pi One Plus |
|
| Manufacturer | NetCube Systems Austria | Avnet | FriendlyElec | emtrion | Xunlong Software |
| Price | $ 137.99 | $ 86.0 | $ 18.0 | $ 78.0 | $ 20.0 |
| SoC | AllWinner V3s | NXP i.MX8M | AllWinner H3 | NXP i.MX8M Mini | AllWinner H6-V200 |
| CPU | 1× ARM Cortex-A7 @ 1.2 Ghz | 4× ARM Cortex-A53 @ 1.5 Ghz | 4× ARM Cortex-A7 @ 1.2 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz |
| GPU | - | OpenGL/ES 3.1, OpenGL 3.0, Vulkan, OpenCL 1.2 | Mali-400 MP2 | GC NanoUltra (3D), GC 320 (2D) | Mali-T720 MP2 |
| Onboard MCU | 1 x ESP32 Xtensa LX6 dual-core (WiFi / Bluetooth) | - | - | - | - |
| RAM | 64.0 MiB DDR2 @ 400MHz | 2.0 GiB DDR4 | 1.0 GiB DDR3 | 4.0 GiB LPDDR4 | 1.0 GiB DDR3 |
| SPI flash | 8.0 MiB, bootable | - | - | - | - |
| eMMC | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 of which are Type-C 1 of which support USB-OTG |
2 × host ports |
2 × host ports 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
| Ethernet |
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
- | - |
| Bluetooth | onboard | onboard | onboard | - | - |
| Camera | - | up to 1 x inputs | up to 1 x inputs | up to 1 x inputs | - |
| Audio |
1 × outputs 1 × mic-in |
1 × spdif-out 6 × I2S |
1 × outputs 1 × mic-in 1 × spdif-out 1 × I2S |
1 × spdif-out |
- |
| GPIO | 12 | 40 | 36 | 8 | 26 |
| PWM | - | 4 | 1 | 1 | - |
| I2C | 1 | 4 | 1 | 2 | - |
| SPI | - | 3 | 1 | 2 | - |
| UART | 1 | 4 | 2 | 4 | - |
| CAN | 1 | - | - | - | - |
| Pin header | - |
HAT (Raspberry Pi) |
- | - |
HAT (Raspberry Pi) |
| Form factor | DIN rail | - | - | - | - |
| Dimensions | 106 mm x 82 mm x 45 mm | 85 mm x 56 mm x 12 mm | 40 mm x 40 mm x 5 mm | 82 mm x 50 mm x 10 mm | 68 mm x 48 mm x 15 mm |
| Temperature | -20.0°C - 70.0°C | 0.0°C - 70.0°C | - | 0.0°C - 70.0°C | -10.0°C - 65.0°C |
| Software | Linux: True |
Linux: True Android: 9.0 Windows: 10 IoT |
Linux: True |
Linux: True Android: 9 Windows: WEC7, WEC2013, 10 IoT Core |
Linux: True Android: 7.0 |