Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
NetCube Systems Austria Kumquat vs. i2SOM PanGu Board vs. Avnet MaaXBoard vs. FriendlyElec NanoPi NEO AIR vs. emtrion emCON-MX8M Mini
Kumquat |
PanGu Board |
MaaXBoard |
NanoPi NEO AIR |
emCON-MX8M Mini |
|
| Manufacturer | NetCube Systems Austria | i2SOM | Avnet | FriendlyElec | emtrion |
| Price | $ 137.99 | $ 47.0 | $ 86.0 | $ 18.0 | $ 78.0 |
| SoC | AllWinner V3s | STMicroelectronics STM32MP157 | NXP i.MX8M | AllWinner H3 | NXP i.MX8M Mini |
| CPU | 1× ARM Cortex-A7 @ 1.2 Ghz | 2× ARM Cortex-A7 @ 650 Mhz | 4× ARM Cortex-A53 @ 1.5 Ghz | 4× ARM Cortex-A7 @ 1.2 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz |
| GPU | - | Vivante (3D GPU; supports OpenGL ES2.0) | OpenGL/ES 3.1, OpenGL 3.0, Vulkan, OpenCL 1.2 | Mali-400 MP2 | GC NanoUltra (3D), GC 320 (2D) |
| Onboard MCU | 1 x ESP32 Xtensa LX6 dual-core (WiFi / Bluetooth) | - | - | - | - |
| RAM | 64.0 MiB DDR2 @ 400MHz | 1.0 GiB DDR3L | 2.0 GiB DDR4 | 1.0 GiB DDR3 | 4.0 GiB LPDDR4 |
| SPI flash | 8.0 MiB, bootable | - | - | - | - |
| eMMC | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 of which are Type-C 1 of which support USB-OTG |
3 × host ports 1 of which support USB-OTG |
2 × host ports |
2 × host ports 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
- |
| Bluetooth | onboard | - | onboard | onboard | - |
| Camera | - | up to 1 x inputs | up to 1 x inputs | up to 1 x inputs | up to 1 x inputs |
| Audio |
1 × outputs 1 × mic-in |
1 × outputs 1 × line-in |
1 × spdif-out 6 × I2S |
1 × outputs 1 × mic-in 1 × spdif-out 1 × I2S |
1 × spdif-out |
| GPIO | 12 | 1 | 40 | 36 | 8 |
| PWM | - | 1 | 4 | 1 | 1 |
| ADC | - | 1 | - | - | - |
| I2C | 1 | 1 | 4 | 1 | 2 |
| SPI | - | 1 | 3 | 1 | 2 |
| UART | 1 | 1 | 4 | 2 | 4 |
| CAN | 1 | 1 | - | - | - |
| Pin header | - | - |
HAT (Raspberry Pi) |
- | - |
| Form factor | DIN rail | - | - | - | - |
| Dimensions | 106 mm x 82 mm x 45 mm | 106 mm x 70 mm x 7 mm | 85 mm x 56 mm x 12 mm | 40 mm x 40 mm x 5 mm | 82 mm x 50 mm x 10 mm |
| Temperature | -20.0°C - 70.0°C | 0.0°C - 70.0°C | 0.0°C - 70.0°C | - | 0.0°C - 70.0°C |
| Software | Linux: True | Linux: True |
Linux: True Android: 9.0 Windows: 10 IoT |
Linux: True |
Linux: True Android: 9 Windows: WEC7, WEC2013, 10 IoT Core |