Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
NetCube Systems Austria Kumquat vs. i2SOM PanGu Board vs. Avnet MaaXBoard vs. Litemax AECX-TGL0 vs. Hardkernel ODROID-HC2 vs. FriendlyElec NanoPi NEO AIR vs. ADL Embedded Solutions ADLE3900HDC
Kumquat |
PanGu Board |
MaaXBoard |
AECX-TGL0 |
ODROID-HC2 |
NanoPi NEO AIR |
ADLE3900HDC |
|
| Manufacturer | NetCube Systems Austria | i2SOM | Avnet | Litemax | Hardkernel | FriendlyElec | ADL Embedded Solutions |
| Price | $ 137.99 | $ 47.0 | $ 86.0 | - | $ 54.0 | $ 18.0 | - |
| SoC | AllWinner V3s | STMicroelectronics STM32MP157 | NXP i.MX8M | Intel Tiger Lake-UP3 | Samsung Exynos 5422 | AllWinner H3 | Intel Atom E39xx |
| CPU | 1× ARM Cortex-A7 @ 1.2 Ghz | 2× ARM Cortex-A7 @ 650 Mhz | 4× ARM Cortex-A53 @ 1.5 Ghz | 4× x86 11th Gen Core @ 2.2 Ghz |
4× ARM Cortex-A15 @ 2.0 Ghz 4× ARM Cortex-A7 @ 1.4 Ghz |
4× ARM Cortex-A7 @ 1.2 Ghz | 4× x86 @ 2.0 Ghz |
| GPU | - | Vivante (3D GPU; supports OpenGL ES2.0) | OpenGL/ES 3.1, OpenGL 3.0, Vulkan, OpenCL 1.2 | HD Gen 12-H, LP-HD Graphics | Mali-T628 MP6 | Mali-400 MP2 | Intel HD Graphics 505 |
| Onboard MCU | 1 x ESP32 Xtensa LX6 dual-core (WiFi / Bluetooth) | - | - | - | - | - | - |
| RAM | 64.0 MiB DDR2 @ 400MHz | 1.0 GiB DDR3L | 2.0 GiB DDR4 | 2.0 GiB DDR3L | 1.0 GiB DDR3 | 8.0 GiB LPDDR4 | |
| SPI flash | 8.0 MiB, bootable | - | - | - | - | - | - |
| eMMC | - | 1 × soldered | 1 × soldered | - | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 of which are Type-C 1 of which support USB-OTG |
3 × host ports 1 of which support USB-OTG |
2 × host ports | 8 × host ports | 1 × host port |
2 × host ports 1 of which support USB-OTG |
8 × host ports |
| Ethernet |
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
- |
| Bluetooth | onboard | - | onboard | - | - | onboard | - |
| Camera | - | up to 1 x inputs | up to 1 x inputs | - | - | up to 1 x inputs | - |
| Audio |
1 × outputs 1 × mic-in |
1 × outputs 1 × line-in |
1 × spdif-out 6 × I2S |
1 × outputs 1 × line-in 1 × mic-in |
- |
1 × outputs 1 × mic-in 1 × spdif-out 1 × I2S |
- |
| GPIO | 12 | 1 | 40 | 8 | - | 36 | 8 |
| PWM | - | 1 | 4 | - | - | 1 | - |
| ADC | - | 1 | - | - | - | - | - |
| I2C | 1 | 1 | 4 | - | - | 1 | - |
| SPI | - | 1 | 3 | 1 | - | 1 | - |
| UART | 1 | 1 | 4 | - | 1 | 2 | - |
| CAN | 1 | 1 | - | - | - | - | - |
| Pin header | - | - |
HAT (Raspberry Pi) |
- | - | - | - |
| Form factor | DIN rail | - | - | - | - | - | - |
| Dimensions | 106 mm x 82 mm x 45 mm | 106 mm x 70 mm x 7 mm | 85 mm x 56 mm x 12 mm | 146 mm x 102 mm | 197 mm x 115 mm x 42 mm | 40 mm x 40 mm x 5 mm | 147 mm x 102 mm |
| Temperature | -20.0°C - 70.0°C | 0.0°C - 70.0°C | 0.0°C - 70.0°C | 0.0°C - 60.0°C | - | - | -20.0°C - 70.0°C |
| Software | Linux: True | Linux: True |
Linux: True Android: 9.0 Windows: 10 IoT |
Linux: True (mainline) Windows: 10 |
Linux: True | Linux: True |
Linux: True (mainline) Windows: yes |