Board-DB logo

Board Technical Specifications Comparison

Add boards using the dropdown below, and compare their specs side by side.

NetCube Systems Austria Kumquat vs. MYIR Tech MYC-JX8MX vs. ALi Corporation TIGER Board vs. Variscite Spear-MX8 vs. i2SOM PanGu Board vs. MediaTek LinkIt Smart 7688 duo vs. Avnet MaaXBoard vs. ADL Embedded Solutions ADLE3900SEC vs. DFI BT259 vs. Compulab CL-SOM-iMX8X

×

Kumquat
×

MYC-JX8MX
×

TIGER Board
×

Spear-MX8
×

PanGu Board
×

LinkIt Smart 7688 duo
×

MaaXBoard
×

ADLE3900SEC
×

BT259
×

CL-SOM-iMX8X
Manufacturer NetCube Systems Austria MYIR Tech ALi Corporation Variscite i2SOM MediaTek Avnet ADL Embedded Solutions DFI Compulab
Price $ 137.99 $ 99.0 $ 62.0 $ 139.0 $ 47.0 $ 16.0 $ 86.0 - - -
SoC AllWinner V3s NXP i.MX 8M ALi M3733 NXP i.MX 8QuadMax STMicroelectronics STM32MP157 MediaTek MT7688AN NXP i.MX8M Intel Atom E39xx Intel Atom/Celeron NXP i.MX8 QuadXPlus
CPU 1× ARM Cortex-A7 @ 1.2 Ghz 4× ARM Cortex-A53 @ 1.3 Ghz 4× ARM Cortex-A9 @ 1.7 Ghz 2× ARM Cortex-A72 @ 1.8 Ghz
4× ARM Cortex-A53 @ 1.2 Ghz 		2× ARM Cortex-A7 @ 650 Mhz 1× MIPS 24KEc @ 580 Mhz 4× ARM Cortex-A53 @ 1.5 Ghz 4× x86 @ 2.0 Ghz 4× x86 @ 2.0 Ghz 4× ARM Cortex-A35 @ 1.2 Ghz
GPU - Vivante GC7000-Lite Mali-400 MP2 2x Vivante GC7000VX Vivante (3D GPU; supports OpenGL ES2.0) - OpenGL/ES 3.1, OpenGL 3.0, Vulkan, OpenCL 1.2 Intel HD Graphics 505 - GC7000Lite
Embedded MCU - - - 2 x ARM Cortex-M4F - - - - - -
Onboard MCU 1 x ESP32 Xtensa LX6 dual-core (WiFi / Bluetooth) - - - - - - - - -
RAM 64.0 MiB DDR2 @ 400MHz 1.0 GiB DDR4 1.0 GiB 8.0 GiB LPDDR4 1.0 GiB DDR3L - 2.0 GiB DDR4 4.0 GiB DDR4 4.0 GiB DDR3L 4.0 GiB LPDDR4
SPI flash 8.0 MiB, bootable - - - - - - - - -
eMMC - 1 × soldered 1 × soldered 1 × soldered 1 × soldered 1 × soldered 1 × soldered - - 1 × soldered
USB
1 of which are Type-C
1 of which support USB-OTG 		4 × host ports 3 × host ports
1 of which support USB-OTG 		1 × host port
2 of which support USB-OTG 		3 × host ports
1 of which support USB-OTG 		1 × host port 2 × host ports 6 × host ports 6 × host ports 4 × host ports
1 of which support USB-OTG
Ethernet
1× 10/100
1× 1 Gbps
1× 10/100
1× 1 Gbps
1× 1 Gbps
1× 10/100
1× 1 Gbps
1× 1 Gbps
1× 1 Gbps
wake on lan supported
1× 1 Gbps
Wi-Fi On-board Wi-Fi without external antenna
2.4Ghz b/g/n 		- On-board Wi-Fi without external antenna
2.4Ghz b/g/n 		On-board Wi-Fi without external antenna
2.4Ghz b/g/n
5Ghz a/n/ac 		- On-board Wi-Fi without external antenna
2.4Ghz b/g/n 		On-board Wi-Fi without external antenna
2.4Ghz b/g/n
5Ghz a/n/ac 		- - On-board Wi-Fi without external antenna
2.4Ghz b/g/n
5Ghz a/n/ac
Bluetooth onboard - onboard onboard - - onboard - - onboard
Camera - up to 2 x inputs - up to 2 x inputs up to 1 x inputs - up to 1 x inputs - - up to 1 x inputs
Audio 1 × outputs
1 × mic-in 		1 × outputs 1 × outputs
1 × I2S 		1 × outputs
1 × line-in
1 × mic-in
1 × spdif-out
1 × I2S 		1 × outputs
1 × line-in 		1 × outputs
1 × I2S
1 × spdif-out
6 × I2S 		- -
1 × spdif-out
1 × I2S
GPIO 12 108 63 - 1 27 40 - 8 96
PWM - - 2 - 1 8 4 - - 4
ADC - - - - 1 - - - - 5
I2C 1 3 1 4 1 1 4 - - 4
SPI - 2 1 4 1 1 3 - 1 4
UART 1 3 1 5 1 2 4 - - 4
CAN 1 - - 3 1 - - - - -
Pin header - - HAT (Raspberry Pi)
- - - HAT (Raspberry Pi)
- - -
Form factor DIN rail - - - - - - - - -
Dimensions 106 mm x 82 mm x 45 mm 82 mm x 52 mm 93 mm x 60 mm x 13 mm 68 mm x 55 mm x 5 mm 106 mm x 70 mm x 7 mm 61 mm x 26 mm x 13 mm 85 mm x 56 mm x 12 mm 75 mm x 75 mm 165 mm x 115 mm 68 mm x 38 mm x 5 mm
Temperature -20.0°C - 70.0°C -30.0°C - 80.0°C - -25.0°C - 85.0°C 0.0°C - 70.0°C - 0.0°C - 70.0°C -20.0°C - 70.0°C 0.0°C - 60.0°C 0.0°C - 70.0°C
Software Linux: True Linux: True Linux: True
Android: supported 		Linux: True
Android: yes 		Linux: True Linux: True Linux: True
Android: 9.0
Windows: 10 IoT 		Linux: True (mainline)
Windows: 10 		Linux: True (mainline)
Windows: 7, WES7, 8.1, WES8 		Linux: True