Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
NetCube Systems Austria Kumquat vs. MYIR Tech MYC-JX8MX vs. i2SOM PanGu Board vs. FriendlyElec NanoPi NEO AIR
Kumquat |
MYC-JX8MX |
PanGu Board |
NanoPi NEO AIR |
|
| Manufacturer | NetCube Systems Austria | MYIR Tech | i2SOM | FriendlyElec |
| Price | $ 137.99 | $ 99.0 | $ 47.0 | $ 18.0 |
| SoC | AllWinner V3s | NXP i.MX 8M | STMicroelectronics STM32MP157 | AllWinner H3 |
| CPU | 1× ARM Cortex-A7 @ 1.2 Ghz | 4× ARM Cortex-A53 @ 1.3 Ghz | 2× ARM Cortex-A7 @ 650 Mhz | 4× ARM Cortex-A7 @ 1.2 Ghz |
| GPU | - | Vivante GC7000-Lite | Vivante (3D GPU; supports OpenGL ES2.0) | Mali-400 MP2 |
| Onboard MCU | 1 x ESP32 Xtensa LX6 dual-core (WiFi / Bluetooth) | - | - | - |
| RAM | 64.0 MiB DDR2 @ 400MHz | 1.0 GiB DDR4 | 1.0 GiB DDR3L | 1.0 GiB DDR3 |
| SPI flash | 8.0 MiB, bootable | - | - | - |
| eMMC | - | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 of which are Type-C 1 of which support USB-OTG |
4 × host ports |
3 × host ports 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | - | - | onboard |
| Camera | - | up to 2 x inputs | up to 1 x inputs | up to 1 x inputs |
| Audio |
1 × outputs 1 × mic-in |
1 × outputs |
1 × outputs 1 × line-in |
1 × outputs 1 × mic-in 1 × spdif-out 1 × I2S |
| GPIO | 12 | 108 | 1 | 36 |
| PWM | - | - | 1 | 1 |
| ADC | - | - | 1 | - |
| I2C | 1 | 3 | 1 | 1 |
| SPI | - | 2 | 1 | 1 |
| UART | 1 | 3 | 1 | 2 |
| CAN | 1 | - | 1 | - |
| Form factor | DIN rail | - | - | - |
| Dimensions | 106 mm x 82 mm x 45 mm | 82 mm x 52 mm | 106 mm x 70 mm x 7 mm | 40 mm x 40 mm x 5 mm |
| Temperature | -20.0°C - 70.0°C | -30.0°C - 80.0°C | 0.0°C - 70.0°C | - |
| Software | Linux: True | Linux: True | Linux: True | Linux: True |