Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Optimus Embedded Systems Prime vs. LattePanda LattePanda Delta 432 vs. FS Elektronik Systeme armStone MX8M vs. LinkSprite pcDuino3 vs. StarFive VisionFive 2 4GB
Prime |
LattePanda Delta 432 |
armStone MX8M |
pcDuino3 |
VisionFive 2 4GB |
|
| Manufacturer | Optimus Embedded Systems | LattePanda | FS Elektronik Systeme | LinkSprite | StarFive |
| Price | $ 125.0 | $ 188.0 | - | $ 79.0 | $ 65.0 |
| SoC | Rockchip RK3399 | Intel Celeron N4100 | NXP i.MX 8M | AllWinner A20 | StarFive JH7110 |
| CPU |
2× ARM Cortex-A72 @ 2.0 Ghz 4× ARM Cortex-A53 @ 1.5 Ghz |
4× Intel Gemini Lake @ 2.4 Ghz | 2× ARM Cortex-A53 (dual or quad) @ 1.5 Ghz | 2× ARM Cortex-A7 @ 1.0 Ghz | 4× SiFive U74 @ 1.5 Ghz |
| GPU | Mali-T860 MP4 | Intel HD Graphics 600 | vulkan | Mali-400 MP2 | Imagination BXE-4-32 MC1 |
| RAM | 4.0 GiB DDR4 | 4.0 GiB LPDDR4 | 8.0 GiB LPDDR4 | 1.0 GiB DDR3 | 4.0 GiB LPDDR4 |
| SPI flash | - | - | - | - | 16.0 MiB, bootable |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | - |
| SD | - | - | - | - | 1 × bootable: True |
| USB |
2 × host ports 1 of which support USB-OTG |
3 × host ports 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
5 × host ports 1 of which are Type-C |
| Ethernet |
1× 1 Gbps wake on lan supported
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 10/100
|
2× 1 Gbps
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
| Bluetooth | onboard | onboard | - | - | - |
| Modem | onboard | - | - | - | - |
| Camera | up to 3 x inputs | - | up to 1 x inputs | - | up to 1 x inputs |
| Audio |
1 × outputs 1 × line-in 1 × mic-in 1 × I2S |
1 × outputs 1 × I2S |
1 × outputs 1 × line-in 1 × mic-in |
1 × outputs | 1 × outputs |
| GPIO | 40 | 100 | - | 14 | 28 |
| PWM | - | - | 3 | 1 | - |
| ADC | - | - | 4 | 1 | - |
| I2C | 2 | 1 | 4 | - | - |
| SPI | 2 | 1 | 3 | - | - |
| UART | 1 | 1 | 4 | - | 1 |
| Pin header |
HAT (Raspberry Pi) |
Shield (Arduino) | - | Shield (Arduino) | - |
| Form factor | - | - | Pico-ITX | - | Pico-ITX |
| Dimensions | 65 mm x 85 mm x 2 mm | 130 mm x 90 mm x 14 mm | 100 mm x 72 mm x 15 mm | - | 100 mm x 72 mm |
| Temperature | -40.0°C - 85.0°C | - | 0.0°C - 70.0°C | - | - |
| Software |
Linux: True Android: Android Windows: Embedded ARM |
Linux: True (mainline) Android: x86 Windows: 10 |
Linux: True |
Linux: True Android: 4.2 |
Linux: True |